Installation Guide

To connect the Box directly to the technical
equipment in the absence of a BMS
● Prepare the list of equipment to be connected and their respective communication
protocols.
● Collect the technical documentation of each manufacturer to know where and how to
connect to its devices (user console, configuration wizard, manufacturer’s site, etc.).
● Draw up an installation schematic.
The equipment communicates in Modbus IP
To connect only one equipment
● Make sure to have an Ethernet cable.
● Connect the cable to the Ethernet port of the Box ETH1 or ETH2.
● Connect the other end of the cable to the equipment.
2022-04-V1.3-EN 28