User Manual

Model WPQCM-5
Poly-Alloy Quick-Connect
Multi-Purpose Manifold Kit
The WPQCM-5 Quick-Connect Multi-Purpose manifold can be
used as a stand alone master manifold or as a remote fixture
bundle or distribution junction. Can be used with Copper,
CPVC and PEX. No tools required to make connections.
Specifications
System shall be plumbed using the Watts WaterPEX WPQCM-5
Quick-Connect manifold for any master or remote manifold water
distribution requirements.
Approvals
Features
• Listed by the National Sanitation Foundation to Standard 61
for use in potable water systems.
• Manufactured in accordance with American Society for
Testing and Materials (ASTM) F-877.
• Listed by IAPMO to be compliant to CSA standard B135.5
and IGC 109.
• Manufactured from Acudel
®
engineered thermoplastic resin.
For Residential and Commercial Applications
ES-WP-WPQCM-5
Job Name
–––––––––––––––––––––––––––––––––––––––––––
Contractor
––––––––––––––––––––––––––––––––––––––––––––
Job Location
–––––––––––––––––––––––––––––––––––––––––
Approval
–––––––––––––––––––––––––––––––––––––––––––––
Engineer
–––––––––––––––––––––––––––––––––––––––––––––
Contractor’s P.O. No.
––––––––––––––––––––––––––––––––––
Approval
–––––––––––––––––––––––––––––––––––––––––––––
Representative
––––––––––––––––––––––––––––––––––––––––
WPQCM-5
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements,
please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials with-
out prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.
Caution: The polysulfone material used in the Quick-Connect
fittings can be compromised by exposure to volatile organic
compounds (VOC’s) and caustic chemicals. Therefore, DO
NOT expose this product to any such chemical or foreign sub-
stance, which would include exposure to the following prod-
ucts: Pipe Dopes (thread sealants), bug sprays, lubricants,
cleaners, paints, bleaches, acids, solder fluxes, plastic pip-
ing primers and cements, oxidizing agents, alkaline solutions,
thinners, fuels, oil based caulks, hydrocarbons, spray foam of
foaming agents (insulation).
LEAD FREE
*
*The wetted surface of this product contacted by consumable
water contains less than one quarter of one percent (0.25%) of
lead by weight.