Manual

End Connections:
Horizontal End: Mates with Ductile Iron Pipe and AWWA
C900Pipe(PVCPipewithDuctileIronPipeEquivalentOD’s)
Utilizes Gasket conforming to UL 157 with “Lock in”
gasket configuration
Vertical End:
Meets AWWA C-606 dimensions for roll grooved pipe
Meets AWWA C-207 class D for flanges
Ratings
MeetsAWWAC-900pressureclass200,DR14Pipe
Testing
Weldsare100%leaktestedatthefactory
SIZE (DN) MATING PIPE OD
in. mm in. mm
4 100 4.8 122
6 150 6.9 175
8 200 9.1 230
10 250 11.1 282
SIZE (DN) WEIGHT
A (OD) B C
in. mm in. mm ft. cm ft. cm lbs. kg
4 100 4
1
⁄2 114 6 183 6 183 71 32
6 150 6
5
⁄8 168 6 183 6 183 98 44
8 200 8
5
⁄8 219 6 183 6 183 129 59
10 250 10
3
⁄4 273 6 183 6 183 202 92
Consult factory for custom leg dimensions.
A
Grooved End
(Flange Optional)
CIPS Coupling
Tie-Rod Bracket
SIZE DESIGN PROOF PRESSURE
in. mm psi bar
4 100 1000 70
6 150 1000 70
8 200 800 56
10 250 800 56
C
B
Standards
NFPA — Designed to allow the contractor to conform to NFPA
24-2007Section10.6.5
Where a riser is close to building foundations, underground
fittings of proper design and type shall be used to avoid pipe
joints being located under the foundations.
NFPA —24-2007—10.1.1,10.6.7
Approvals
Fittings UL HKQA(4"-10")
Dimensions – Weights
ES-TR1235  ©2012Watts
USA:Tel.(978)688-1811•Fax:(978)794-1848•www.watts.com
Canada: Tel.(905)332-4090•Fax:(905)332-7068•www.wattscanada.ca
A Watts Water Technologies Company