Specification

Series TK-9A
Backflow Preventer Test Kit
Model TK-9A Backflow Preventer Test Kit is a compact porta-
ble device made for testing all reduced pressure zone backflow
prevention assemblies, double check valve assemblies, pressure
vacuum breakers and spill-resistant vacuum breakers to USC and
ASSE 5000 Standards. The TK-9A comes with adapter fittings to
easily connect to all testable assemblies. Rugged weather proof
gauge design with durable 600 PSI ball valves for on/off use, and
needle valves for precise metering. Accuracy is +/- 2%. The unit
includes a shock resistant carrying case for easy handling and
accessibility.
Features
• 4
1
⁄2" (114mm) diameter face gauge with dual scale
(0 - 15psi/0-1 bar)
• Test valves: (2) ball valves
(1) needle valve for precise metering
• Adapters: (3)
1
⁄4" threaded coupling adapters
(3)
1
⁄2" x
1
⁄4" bushings
(3)
3
⁄4" x
1
⁄4" bushings
• Hoses: (3) 3' (914mm) hoses with female-threaded
swivel couplings
• 16" (406mm) securing strap
• Moisture resistant operation manual
• A sturdy form fitting Carrying Case
• Extra fittings for application to other valve types
Pressure-Temperature
Maximum Working Pressure: 175psi (12.1 bar)
Maximum Working Temperature: 210°F (98°C)
TK-9A
ES-TK-9A
Job Name
–––––––––––––––––––––––––––––––––––––––––––
Contractor
––––––––––––––––––––––––––––––––––––––––––––
Job Location
–––––––––––––––––––––––––––––––––––––––––
Approval
–––––––––––––––––––––––––––––––––––––––––––––
Engineer
–––––––––––––––––––––––––––––––––––––––––––––
Contractor’s P.O. No.
––––––––––––––––––––––––––––––––––
Approval
–––––––––––––––––––––––––––––––––––––––––––––
Representative
––––––––––––––––––––––––––––––––––––––––
ES-TK-9A 1816 © 2018 Watts
USA: T: [phone] • F: [phone] • Watts.com
Canada: T: [phone] • F: [phone] • Watts.ca
Latin America: T: (52) 81-1001-8600 • Watts.com
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts
reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications
on Watts products previously or subsequently sold.
The information contained herein is not intended to replace the full
product installation and safety information available or the experience
of a trained product installer. You are required to thoroughly read all
installation instructions and product safety information before begin-
ning the installation of this product.
NOTICE