Flippen Float Valves Agricultural & Irrigation Commercial & Industrial Air Conditioning & Refrigeration watts.
This Watts Flippen Float Valve brochure features high quality, reliable control assemblies and components that provide make up water for pressure washers, cooling towers, heat transfer units, cattle watering tanks, refrigeration units, and for many other applications where float valves are required.
Heavy Duty Float Valves Features • Pipe-threaded for pipe connections and straight-pipe threaded for locknut Machined Flange • Machined flange for support against tank wall • All bronze bodies Inlet • Serrated arms for quick easy adjustment of water Connection level (all sizes) (FNPT) • High tensile manganese bronze long and short arms • No jam single lever action Pipe/Straight • Replaceable seals All Bronze Body No Jam Linkage Cotter Pin Pivot Assembly Thread (NPSM) Flow Specifications Size Pressure
Heavy Duty Float Valves Valve Assembly Non-Threaded Outlet A high capacity valve that can be tank wall-mounted. Inlet side has a machined flange 1"– 2" are also female NPT pipe threaded for inlet connection. All sizes have a male straight-pipe threaded for locknut. (See replacement parts for locknuts).
Heavy Duty Stems and Adaptors Stems Brass with threads on both ends. (For other sizes consult factory.) Model 11 11.5 11-12 12 12.5 13 Nuzzle Assembly End #1 Thread Length ⁄ -20 ⁄ -20 1⁄4-20 5⁄16-18 5⁄16-18 3⁄8-16 14 14 10" 12" 12" 12" 12" 12" End #2 Thread Rod Weight Diam. each (oz.) ⁄ -20 ⁄ -18 1⁄4-20 5⁄16-18 3⁄8-16 3⁄8-16 ⁄" ⁄ " 1⁄4" 5⁄16" 3⁄8" 3⁄8" 14 5 16 Inner Pack Master 10 10 10 10 10 10 50 50 50 50 50 50 2.3 4.3 2.9 4.3 6.3 6.3 14 5 16 Allows ball to float free.
Heavy Duty Floats Copper Floats High grade copper construction. Firmly bonded overlapping joints (leadfree solder). Maximum Temperature - 200°F Diameter Thread Size Model Connection 4" x 5" 4" 5" 6" 6" 6" 7" 8" 10" 12" ⁄ -20 ⁄ -20 1⁄4-20 1⁄4-20 5⁄16-18 3⁄8-16 5⁄16-18 3⁄8-16 3⁄8-16 3⁄8-16 CX C4 C5 C6 C6-7 C6-3 C7 C8 C10 C12 14 14 Inner Pack Master Pack Weight each (oz.) 1 1 1 1 1 1 1 1 1 1 8 8 12 8 8 24 12 8 4 4 2.6 4.3 6.5 8.3 8.3 8.3 15.3 20.0 44.0 67.
Heavy Duty Float Valve Replacement Parts Valve Arm Sets (Bronze) Model Size (Inches) Inner Pack Master Pack A1214 A1210 3⁄8, 1⁄2, 3⁄4 1" (larger) 10 10 100 100 Valve arm set includes long arm, short arm & thumb screw only.
Standard Duty Float Valves Standard Duty Valves 3⁄8" - 1" Threaded Outlet 11⁄4" - 2" Non-Threaded Outlet Standard Duty 3⁄8" through 1" Bronze body with MNPT threaded inlet and outlet, 11⁄4" through 2" Bronze body with female NPT inlet-open outlet. Cotter pin pivot arm assembly. Replaceable plungers.
Standard Duty Float Valve Replacement Parts Valve Arms For valve sizes 3⁄8" - 1" (Bronze) Model ST2-LA ST2-1 (Long Arm) Thread Size Inner Pack Master Pack N/A ⁄ " - 20" 10 10 100 100 Thread Size Inner Pack Master Pack N/A ⁄ " -16" 10 10 100 100 14 (Short Arm) Valve Arms For valve sizes 11⁄4" - 2" (Bronze) Model ST3-LA ST3-1 (Long Arm) 38 (Short Arm) Complete Plunger Assembly (with seals) (Brass) Valve Size Model ⁄" ⁄" 3⁄4" 1" 11⁄4" 11⁄2" 2" ST375-PA ST500-PA ST750-PA ST1000-PA
Evaporative Cooler Valve Assemblies Heavy Duty Cooler Valves Bronze Body Machined in-seat. Buna N seals. Adjustable brass arms. Polyethylene float. 3⁄8" MIP OD x 1⁄8" FIP ID pipe connection. Maximum Pressure - 100psi • Maximum Temperature - 140°F Tube Material Model N/A STD-CA 100psi Capacity Size (Inches) Stem Length Weight (oz.) 3 GPM 8 x 3⁄4 2" 6 Bronze Body Machined in-seat. Buna N seals. Adjustable brass arms. Polyethylene float. 3⁄8" copper tube compression inlet connection.
Automatic Livestock Watering Kits ✱ Model RL600 Automatic Livestock Watering Kit HIGH CAPACITY - Free flow fill rate 6.5 gpm at 50psi. Maximum inlet pressure 75psi. Will fill a 100 gallon tank in less than 15 minutes. Maximum Temperature - 140°F ✱ EASY INSTALLATION - Rubbermaid®: Remove bulkhead fitting from tank. Reverse and install so drain plug is inside the tank. Remove drain plug and install valve assembly.
For additional information, visit our web site at: www.watts.com A Watts Water Technologies Company USA: No. Andover, MA • Tel: (978) 688-1811 • Fax: (978) 794-1848 • www.watts.com Canada: Burlington, ON • Tel: (905) 332-4090 • Fax: (905) 332-7068 • www.wattscanada.
