Owner manual

8550 Hansen Road • Houston, Texas 77075 • (Ph) 713.943.0688 • (Fx) 713.944.9445 • www.wattsacv.com

01/05

Mustang Series

DEEP WELL PUMP

CONTROL VALVE

CLOSES VALVE

OPENS VALVE

FLOW

X/Y

(Supply Pressure)

• Installed on branch of tee off main pumping header

• Normally open construction

• Discharges to atmosphere on pump start-up

• Closes slowly diverting pressure into system during

pumping cycle

• Opens slowly on pump shut-off

• Limit Switch turns pump off when valve is fully open

• Adjustable Opening and Closing Speed

• Solenoid equipped with Manual Operator

1 - Main Valve (Dual Chamber)

2 - Limit Switch

3 - 4-Way Solenoid

4 - Adjustable Closing Speed

5 - Adjustable Opening Speed

° X - Isolation Cocks (STANDARD)

° L - Dual Limit Switch

M513-6 or M6513-6 (Globe)

M1513-6 or M61513-6 (Angle)

M513-6 link

STANDARD COMPONENTS OPTIONS and ACCESSORIES

PAGE 1
R DEEP WELL PUMP CONTROL VALVE 01/05 M513-6 or M6513-6 (Globe) M1513-6 or M61513-6 (Angle) Mustang Series • • • • Installed on branch of tee off main pumping header Normally open construction Discharges to atmosphere on pump start-up Closes slowly diverting pressure into system during pumping cycle • • • • Opens slowly on pump shut-off Limit Switch turns pump off when valve is fully open Adjustable Opening and Closing Speed Solenoid equipped with Manual Operator 3 2 X/Y (Supply Pressure) 5 4 X X 1