User guide

Hot
140°F
Cold
Cold
LFMMV-M1
Mixed
110°F
Mixed
110°F
Hot
Cold
Cold
Supply
Stops
Typical
Two Handled Faucet
Typical
Two Handled Faucet
Figure 2 – Typical ASSE 1070 Application
Quick-Connect Installation
1.Markpipeasshown.
Thisispipeinsertiondepth.
2.Cleanpipeend.
1.Removecolletclip.
2.Depresscollet.
3.Pulltubingfromtailpiece.
3.IfusingPEXtubing,insertpipe
stiffener(provided)intoendofpipe.
4.Pushtubingintotailpieceuptomark.
5.Insertcolletclip.
To Connect
To Disconnect
PEX tubing only
Pipe Stiffener
Tail Piece
Mark
Collet clip
Collet depressed
1
1
/2 in. (38.1mm)
1
3
/4 in. (44.45mm)
1
7
/8 in.(47.63mm)
1
/2 in. Pipe (12.7mm)
3
/4 in. Pipe (19.05mm)
1in. Pipe (25.4mm)
Figure 1 – Typical ASSE 1069 Application
Typical LFMMV-M1 Applications
Cold
Hot
LFMMV-M1
Mixed
1.Removecolletclip.