Instruction Manual

ES-WD-ISCA-151-D USA 1344 ISCA-151-D
Tag:
ISCA-151-D
Industry Standard Back-to-back
Offset Thin Wall Closet Carrier
SPECIFICATION: WattsDrainageISCA-151-Dback-to-backverticalthinwallclosetcarrierwithoffsetepoxycoatedcastiron
fitting,4"(102)nohubwasteand2"(51)nohubventconnections,epoxycoatedcastironpatentedcompressionseal
faceplateassembly,epoxycoatedcastironfootsupportsadjustableforstandardandwheelchairheight,adjustableABS
nipplewithintegraltestcap andneoprenebowlgasket,platedhardwareandchromecapsnuts. Carrier complies with
requirements of ASME A112.6.1M up to a 300 lb. (136 kg.) static load.
Options (Select One or More)
Suffix
Description
-M1
ABS Extended Nipple (Up to 24")
-M11
Tiling Frame
-M20
Flush Valve Support
-
M23
2
"(51) RH Auxiliary Inlet
-M24
2
"(51) LH Auxiliary Inlet
Notes:
Anchor legs to concrete floor with minimum 1/2" (13) anchor
bolts (by others).
X = 5-3/4" (146) Maximum with Standard Nipple
-XH Extra-Heavy 500lb. Carrier
(ASME A112.6.1M)
with 3/4”-10” Stainless Steel Studs
9"
(229)
7/1/2"
(191)
17-3/4"
(451)
4-1/2"MIN
(114)
9-1/2"MAX
(241)
15"
(381)
2-3/32" (53)
5/16"
(8)
5/16"
(8)
2-3/32" (53)
7" (178)
12" (305) MIN.
22" (559) MAX.
X"
X"
4"
-US Buy American Compliant