Instruction Manual

ES-WD-ISCA-121-D USA 1343 ISCA-121-D
Tag:
SPECIFICATION: Watts Drainage Products ISCA-121-D Industry Standard back-to-back vertical adjustable water closet
carrier with epoxy coated cast iron fitting, 4"(102) no hub waste and 2"(51) no hub vent connections, epoxy coated cast iron
patent pending compression seal faceplate assembly, epoxy coated cast iron foot supports adjustable for standard and
wheelchair height, adjustable ABS nipple with integral test cap and neoprene bowl gasket, plated hardware and
chrome cap nuts. Carrier complies with requirements of ASME A112.6.1M up to a 300 lb.(136 kg.) static load.
Industry Standard
Back-To-Back Vertical
Adjustable Closet Carrier
ISCA-121-D
Notes:
Siphon jet (4 bolt) arrangement shown. Invert faceplate
assembly for blow-out (3 bolt) bowls.
Anchor legs to concrete floor with minimum 1/2" (13) anchor
bolts (by others).
Options (Select One or More)
Suffix
Description
-M1
ABS Extended Nipple (Up to 24")
-M11
Tiling Frame
-M20
Flush Valve Support
CA-100-EXT
Aux. Support System w/Extended Nipple
X = 5-3/4" (146) Maximum with Standard Nipple
6-23/32"
(171)
15-1/2" (394) MIN
25-1/2" (648) MAX
"X"
2-3/32" (53)
5/16"
(8)
"X"
10-5/8" (270)
2-3/32" (53)
5/16"
(8)
-HS
Hub&SpigotConnections
Extra-Heavy 500lb. Carrier (ASME A112.6.1M)
with 3/4" - 10" Stainless Steel Studs
-XH
-US Buy American Compliant
5" (127) MIN
9" (229) MAX
9" (279)
15" (381)
7-1/2"
(191)
4-1/2" (114)
MIN
9-1/2" (241)
MAX
17-3/4"
(451)