Manual

Commercial Water Softeners
S-WQ-CWS200H 1310 © 2013 Watts
USA: Tel. [phone] • www.watts.com
Canada: Tel. [phone] • www.watts.ca
A Watts Water Technologies Company
Commercial Water Softeners
Specication
model no. mineral Tank Brine Tank SofTening
CapaCiTy
SalT per
regeneraTion
flow raTe & preSSure
Tank
Size
reSin
fT3
gravel
(lBS.)
Tank
Size
SalT
fill
ServiCe
(gpm)
drop
(pSi)
Bkw
(gpm)
max min max min
M4548WH 18x65 5 100 24x41 600 150 K 100 K 75 30 54/70 15/25 10
M4552WH 21x62 7 100 24x50 600 210 K 140 K 105 42 68/88 15/25 13
M4558WH 24x72 10 200 30x50 1200 300 K 200 K 150 60 75/97 15/25 15
M4559WH 30x72 15 400 39x48 2200 450 K 300 K 225 90 88/113 15/25 25
M4560WH 36x72 20 500 39x48 2200 600 K 400 K 300 120 97/126 15/25 35
Note: Flow rates listed above are based on pressure drop only. Selecting a system based on pressure drop alone does not guarantee that the system
will provide adequately softened water. System selection should be based on resin quantity, capacity required, feed water analysis, and application
requirements.
model no. deSCripTion SpaCe required weighT
M4548WH A0150FM200WH with integral turbine meter 24 x 48 x 89 400 lbs.
M4552WH A0210FM200WH with integral turbine meter 24 x 52 x 89 600 lbs.
M4558WH A0300FM200WH with integral turbine meter 30 x 60 x 96 710 lbs.
M4559WH A0450FM200WH with integral turbine meter 39 x 75 x 106 1160 lbs.
M4560WH A0600FM200WH with integral turbine meter 39 x 81 x 107 1560 lbs.
Ordering Information