Owner manual

Models
CDC-A-CE - Supplied with a composite nut compression end
fittings at both ends of the flexible connector and
a brass male iron pipe thread elbow fitting.
For Commercial and Residential Applications
ES-CDC-A
Job Name
–––––––––––––––––––––––––––––––––––––––––––
Contractor
––––––––––––––––––––––––––––––––––––––––––––
Job Location
–––––––––––––––––––––––––––––––––––––––––
Approval
–––––––––––––––––––––––––––––––––––––––––––––
Engineer
–––––––––––––––––––––––––––––––––––––––––––––
Contractor’s P.O. No.
–––––––––––––––––––––––––––––––––––
Approval
–––––––––––––––––––––––––––––––––––––––––––––
Representative
––––––––––––––––––––––––––––––––––––––––
Series CDC-A
Sizes:
3
⁄8" (10mm)
Series CDC-A Braided Stainless Steel Water Supply
Connectors for Dishwashers are used in residential and com-
mercial applications, specifically for hookups to the dishwasher
water supply. These connectors provide full flow capacity,
protection from vibration and bursting under extreme pressure
surges, and superior resistance to chlorinated water. Series
CDC-A connectors consist of white flexible PVC tubing jack-
eted with braided nylon polyester yarn and an outer protective
layer of PVC with infused Microban
®
antimicrobial technology to
inhibit the growth of bacteria that can cause stains, odors and
product degradation.
Features
• Available in lengths: 48", 60", and 72"
(1200, 1500, or 1800mm)
• Tubing
• PVC body jacket
• Braided with polyester yarn
• Protective PVC outer layer with Microban
®
• Composite nuts
• Convenient for difficult installations
• Electrically non-conductive between connection points and
on the hose surface to prevent grounding, sparks and elec-
tronic interference to and from other devices.
• No tube cutting or bending
• No soldering
• No extra adapters, fittings or couplings required
• No tools
Standards
NSF and UPC Listed
Pressure-Temperature
Maximum Working Pressure: 125psi (8.6 bar)
Maximum Temperature: 140°F (60°C)
Note: National residential plumbing codes reference the maxi-
mum operating temperature as 140°F (60°C). Plumbing fix-
tures are designed to ANSI—ASME A112 18.1 at 125psi.
CDC-A-CE
ES-CDC-A 1225 © 2012 Watts
USA: Tel: [phone] • Fax: [phone] • www.watts.com
Canada: Tel: [phone] • Fax: [phone] • www.watts.ca
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts
reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications
on Watts products previously or subsequently sold.
A Watts Water Technologies Company
The Microban
®
trademark and all related trademarks are
the trademarks, service marks or registered trademarks of
Microban International, Ltd. and its subsidiaries.
Dimensions
Materials
Tubing:
Body: PVC
Jacket: Braided with polyester yarn
Protective Layer: PVC - with Antimicrobial Technology
Fittings: Composite nuts
Washer: EPDM
Flexible Connectors with Microban
®
Antimicrobial Technology
Water Supply for Dishwashers
MODEL SIZE UNIT
WgT. (LbS.)
CDC-A-CE
3
⁄8" x
3
⁄8" x 48" 0.50
CDC-A-CE
3
⁄8" x
3
⁄8" x 60" 0.80
CDC-A-CE
3
⁄8" x
3
⁄8" x 72" 1.10