Spec Sheet

Highly efficient, multi ply filter media

A multi-ply laminate is used with our sub micron 0.35 grad for

longer life and greater solids removal.

Full Flow (FF) 4

⁄2" OD x 9

⁄4" Length

MODEL NO. LENGTH MEDIA TYPE MICRON RATING NUMBER PER CASE

PWPL10FFM.35 9

⁄4" Synthetic 0.35 4

PWPL10FFM1 9

⁄4" Synthetic 1 4

PWPL10FFM5 9

⁄4" Synthetic 5 4

PWPL10FFM20 9

⁄4" Synthetic 20 4

PWPL10FFM50 9

⁄4" Synthetic 50 4

Note: Cartridges listed above fit in Full-Flow and Big-Blue

filter housings.

Full Flow (FF) 4

⁄2" OD x 20" Length

MODEL NO. LENGTH MEDIA TYPE MICRON RATING NUMBER PER CASE

PWPL20FFM.35 20” Synthetic 0.35 4

PWPL20FFM1 20” Synthetic 1 4

PWPL20FFM5 20” Synthetic 5 4

PWPL20FFM20 20” Synthetic 20 4

PWPL20FFM50 20” Synthetic 50 4

Note: Cartridges listed above fit in Full-Flow and Big-Blue

filter housings.

Specifications (synthetic media for sediment)

Maximum temperature 140°F (60°C) Center tubes PVC

Minimum temperature 40°F (4.4°C) End caps Molded Urethane

Maximum pressure 40 PSID Maximum flow rate, model 40 50 GPM (12m3HR)

Recommended change out 25-30 PSID Maximum flow rate, model 90 100 GPM (24m3HR)

Filter media PE & PP Maximum flow rate, model 170 150 GPM (36m3HR)

Pleated Filter Cartridges

Greater surface area for longer life and reduced filtration costs.

PWPL20FF

PWPL10FF