Spec Sheet

MAXIMUM FLOW RATES PER CARTRIDGE (GPM)

Micron Rating Standard Cartridge 10" Big Blue 20" Big Blue Jumbo Cartridge

⁄4" 20" 29

⁄4" 40 90 170

0.35 Micron 4 8 12 9 13 25 50 100

1 Micron 4 8 12 10 15 30 60 120

5 Micron 7 14 21 15 25 50 100 150

20 Micron 8 16 24 15 25 50 100 150

50 Micron 10 20 30 15 25 50 100 150

Note: Filter housing selection should also be considered when flow rate per cartridge is determined.

Lower pressure drop for higher flow rates

These cartridges are pleated, so initial pressure drop is sig-

nificantly less compared to depth cartridges, such as wound,

spun, melt blown and resin bonded. As a result, higher flow

rates are possible, reducing filter housing size requirements to

lower capital equipment costs.

Depth Cartridge

(5 micron)

Pleated

Cartridge

(5 micron)

Use the pressure drop charts shown below to help determine the ideal flow rate for your particular application:

Standard Cartridges (9

⁄4") Full Flow (FF) Cartridges Jumbo Cartridges

Note: Pressure drop data shown above include filter housing and cartridge.

Flow rates

Maximum flow rate guidelines for our cartridges are shown below:

Washable & reusable

Our cartridges (5 micron and

up) are washable and reus-

able, to reduce filtration costs.

For best results, direct spray

into pleats to dislodge sedi-

ment. Or, let dry and brush

off filter cake from surface of

the media.

All cartridges

are individually

shrink wrapped

for purity