Specification

Materials

Temperature – Pressure

A Handle Nut Zinc plated carbon steel

B Handle Assembly Zinc plated carbon steel with vinyl insulator

C Packing Nut Brass

D Stem Packing Virgin PTFE

E O-ring Fluorocarbon elastomer (FKM)

F Thrust Washer Virgin PTFE

G Stem Brass

H Tag Cardboard, Mylar coated both sides

I Body Forged Lead Free* copper silicon alloy

J Seats Virgin PTFE

K Ball Chrome plated Lead Free* brass

L Adapter Forged Lead Free* copper silicon alloy brass

Options

SS Stainless steel ball and stem

TH Tee handle

QC Quick connect

CC Cap and chain

* See application note on reverse side for solder end valves with regards to

pressure/temperature rating.

Specifications

Approved valves shall be 2-piece full port design constructed using

Lead Free* forged copper silicon alloy brass body and end adapter.

Lead Free* 2-Piece, Full Port, Ball Valves shall be constructed using

Lead Free* materials. Lead Free* valves shall comply with state

codes and standards, where applicable, requiring reduced lead con-

tent. Seats and stem packing shall be virgin PTFE. Stem shall be

bottom loaded, blowout proof design with fluorocarbon elastomer

O-ring to prevent stem leaks. Valve shall have chrome plated Lead

Free* brass ball and adjustable packing gland. Threaded valves

¼" – 2" shall be CSA approved to ½, 5, and 125psig (14, 34 and

862 kPa), UL/FM approved and ¼" – 4" certified to NSF/ANSI

standard 61/8. Solder valves ½" – 2" to be UL listed FM approved,

and certified to NSF/ANSI standard 61/8. Valve sizes ¼" – 2" shall

be rated to 600psi (41 bar) WOG non-shock and 150psi (10.3 bar)

WSP. Valve sizes 2½" – 4" threaded, shall be rated to 400psi

(27.5 bar) WOG non-shock and 125psi (8.6 bar) WSP. Valve sizes

2½" – 3" solder shall be rated to 400psi (27.5 bar) WOG non-shock

and 125psi (8.6 bar) WSP. Valve shall be a Watts Series LFFBV-3C

(threaded) or LFFBVS-3C (solder).