Overview of Primary Product
Available Models:
1
⁄4" – 2" (8 – 50mm)
Suffix:
QT – quarter-turn ball valves
S – bronze strainer
LF – without shutoff valves
AQT – elbow fittings for 360° rotation
3
⁄4" – 2" (20 – 50mm) only
PC – internal Polymer Coating
LH – locking handle ball valves (open position)
SH – stainless steel ball valve handles
HC – 2
1
⁄2" inlet/outlet fire hydrant fitting (2" valve)
Prefix:
C – clean and check strainer
3
⁄4" – 1" (20 – 25mm) only
U – union connections (see ES-U009)
Available Models: 2
1
⁄2" – 3" (65 – 80mm)
Suffix:
NRS – non-rising stem resilient seated gate valves
OSY – UL/FM outside stem and yoke resilient seated
gate valves
S-FDA – FDA epoxy coated strainer
QT-FDA – FDA epoxy coated quarter-turn ball valve shutoffs
LF – without shutoff valves
S – cast iron strainer
Note: The installation of a drain line is recommended. When
installing a drain line, an air gap is necessary (see ES-AG).
Materials:
1
⁄4" – 2" (8 – 50mm)
Bronze body construction, silicone rubber disc material in the
first and second check plus the relief valve. Replaceable
polymer check seats for first and second checks. Removable
stainless steel relief valve seat. Stainless steel cover bolts.
Standardly furnished with NPT body connections. For option-
al bronze union inlet and outlet connections, specify prefix U
(
1
⁄2" – 2"(15 – 50mm)). Series 009QT furnished with quarter
turn, full port, resilient seated, bronze ball valve shutoffs.
Materials: 2
1
⁄2" and 3" (65 – 80mm)
•
(FDA approved) Epoxy coated cast iron unibody with bronze
seats
• Relief valve with stainless steel seat and trim
•
Bronze body ball valve test cocks
Pressure / Temperature
Series 009
1
/4" – 2" (8 – 50mm) Suitable for supply pressure
up to 175psi (12 bar). Water temperature: 33°F – 180°F
(0.5°C – 75°C).
Sizes 2
1
/2" and 3" (65 and 80mm) are suitable for supply
pressures up to 175psi (12.1 bar) and water temperature at
110°F (43°C) continuous, 140°F (60°C) intermittent.
Standards
USC Manual 8th Edition
†
ASSE No. 1013
AWWA C511-92
CSA B64.4
IAPMO File No. 1563.
†Does not indicate approval status. See below for approved models.
Approvals
ASSE, AWWA, CSA, IAPMO
Approved by the Foundation for Cross-Connection Control
and Hydraulic Research at the University of Southern
California.
Approval models QT, AQT, PC, NRS, OSY.
UL Classified
3
⁄4" – 2" (20 – 50mm)
(LF models only except 009M3LF)
2
1
⁄2" and 3" (65 and 80mm) with OSY gate valves.
Air Gaps and Elbows
MODEL DRAIN OUTLET DIMENSIONS WEIGHT
for 909, 009 AB
and 993 sizes
in. mm in. mm in. mm lbs. kgs.
909AG-A
1
⁄4"–
1
⁄2" 009,
1
⁄2 13 2
3
⁄8 60 3
1
⁄8 79 .625 .28
3
⁄4" 009M2/M3
909AG-C
3
⁄4"–1" 009/909, 1 25 3
1
⁄4 83 4
7
⁄8 124 1.50 .68
1"–1
1
⁄2" 009M2
909AG-F 1
1
⁄4"–2" 009M1, 2 51 4
3
⁄8 111 6
3
⁄4 171 3.25 1.47
1
1
⁄4"–3" 009/909,
2" 009M2, 4"–6" 993
909AG-K 4"–6" 909, 3 76 6
3
⁄8 162 9
5
⁄8 243 6.25 2.83
8"–10" 909M1
909AG-M 8"–10" 909 4 102 7
3
⁄8 187 11
1
⁄4 394 15.50 7.03
909EL-A
1
⁄4"–
1
⁄2" 009,
3
⁄4" 009M2/M3 –– – – – – – –
909EL-C
3
⁄4"–1" 009/909, ––2
3
⁄8 60 2
3
⁄8 60 .38 .17
* 909EL-F 1
1
⁄4"-2" 009M1, ––3
5
⁄8 92 3
5
⁄8 92 2 .91
1
1
⁄4"–2" 009/909,
2" 009M2, 4"–6" 993
* 909EL-H 2
1
⁄2"–3" 009/909 –– – – – – – –
Vertical
A
B
A
B