Install Instructions

ManualsBrandsWatts ManualsBackflow Preventers2nd Check Repair Kit for 1/4" to 1/2" 009 (RK-009-CK2)

1. Remove the retainer from the body bore. The check valve

mod ules can now be removed from the valve by hand or

with a screw driv er. NOTE: The seats and springs of the first

and second check modules are not in ter change able. The

heavier spring and smaller di am e ter seat belong with the first

check module.

2. The check seats are attached to the cage with a bay o net

type lock ing ar range ment. Hold ing the cage in one hand,

push the seat in ward and ro tate clockwise against the cage.

The seat, spring cage, spring and disc assembly are now

in di vid u al com po nents.

NOTE:

⁄4" M2 modules snap apart.

3. The disc assembly may now be cleaned and re-as sem-

bled or, de pend ing on its condition, may be dis card ed and

replaced with a new assembly from the re pair kit. O-rings

should be cleaned or replaced as nec es sary and light ly

greased with the FDA approved grease. Refer to parts price

list, PL-RP-BPD for more information.

4. Re-assemble the check valve modules. Check mod ules are

in stalled in the valve body with the seat fac ing the valve inlet.

The modules must be se cure ly in place be fore the re tain er

can be re placed. On the

⁄4" size re tain er may have to be tilt-

ed slightly into place. Re place relief valve as sem bly.

Watts re serves the right to change or modify prod uct de sign, con struc-

tion, spec i fi ca tions, or ma te ri als with out prior notice and without in cur-

ring any obligation to make such chang es and mod i fi ca tions on Watts

prod ucts previously or subsequently sold.

For additional information, contact your local technical sales

representative, see back page.

Cover O-ring

Retainer

Second Check Assembly

First Check Assembly

Relief

Valve

Module

CHECK ASSEMBLY

⁄4" M3

O-ring

Seal

Spring

Disc

Seat

Check

Cage

CHECK ASSEMBLY

⁄4" –

⁄4"

Injection Molded

Acetal Resin

O-ring Seal

Stainless Steel

Spring

Silicone Seal

1st Check

Module

CHECK ASSEMBLY 1" - 2" (25 – 50mm)

Seat

Seat O-ring

Disc Assembly

Spring

Check Cage

Check Valve Kits

⁄4" – 2" (8 – 50mm)

When ordering, specify Ordering Code, Kit number and Valve Size.

ORDERING CODE KIT NO. SIZE

in. mm

Check Rubber Parts

0887293 RK 009 RC3

⁄4,

⁄8,

⁄2 8, 10, 15

0887003 RK 009M2 RC3

⁄4 20

0888522 RK 009M3 RC3

⁄4 20

0887507 RK SS009 RC1

⁄2 15

0887517 RK SS009M2 RC1

⁄4 20

0888595 RK SS009M3 RC1

⁄4 –

⁄4 8-20

0887017 RK 009 RC1

⁄4 – 1 20-25

0887527 RK SS009 RC1 1 25

0887791 RK 009M2 RC1 1 25

0887508 RK SS009 RC2

⁄2 15

0887518 RK SS009M2 RC2

⁄4 20

0888596 RK SS009M3 RC2

⁄4 –

⁄4 8-20

0887180 RK 009 RC2

⁄4 – 1 20-25

0887528 RK SS009 RC2 1 25

0887792 RK 009M2 RC2 1 25

Kit consists of: Disc, Cover O-ring and Seat O-ring.

Retainers

1047053 99AB47

⁄4,

⁄8,

⁄2 8, 10, 15

1047394 99BA47 M2-M3

⁄4 20

1047001 99FA47 1

⁄4 – 2 32-50

1047001 99FA47 M1, 2" M2 1

⁄4 – 2 32-50

1047401 99EA47 M2 1

⁄4 – 1

⁄2 32-40

LEAD FREE

ORDERING CODE KIT NO. SIZE

in. mm

First Check Kits

0887291 RK 009 CK1

⁄4,

⁄8,

⁄2 8, 10, 15

0887505 RK SS009 CK1

⁄2 15

0887000 RK 009M2 CK1

⁄4 20

0887515 RK SS009M3 CK1

⁄4 –

⁄4 8-20

0888520 RK 009M3 CK1

⁄4 20

0887005 RK 009 CK1

⁄4 – 1 20-25

0887009 RK 009 CK1SS

⁄4 – 1 20-25

0887525 RK SS009 CK1 1 25

0887789 RK 009M2 CK1 1 25

Kit consists of: Check assembly and Cover O-ring.

Second Check Kits

0887292 RK 009 CK2

⁄4,

⁄8,

⁄2 8, 10, 15

0887506 RK SS009 CK2

⁄2 15

0887001 RK 009M2 CK2

⁄4 20

0887516 RK SS009M3 CK2

⁄4 –

⁄4 8, 10, 15

0888521 RK 009M3 CK2

⁄4 15

0887007 RK 009 CK2

⁄4 – 1 15-25

0887011 RK 009 CK2SS

⁄4 – 1 15-25

0887526 RK SS009 CK2 1 25

0887790 RK 009M2 CK2 1 25

Kit consists of: Check assembly and Cover O-ring.

LEAD FREE

⁄4" – 1" (8 – 25mm)

* The wetted surface of this product contacted by consumable

water contains less than 0.25% of lead by weight.

Servicing First & Second Check Valves

Series 009 and LF009

⁄4" – 1" (8 – 25mm)