Product Overview

LF3006
Series LF3006
Dielectric Unions
Sizes:
1
⁄2" – 2"
Series LF3006 Dielectric Unions feature a female iron pipe thread
to female iron pipe thread (black). These unions are designed to
be installed between pipe made from dissimilar metals to prevent
accelerated corrosion and deterioration in the piping system due
to galvanic and stray current. The LF3006 features Lead Free*
construction to comply with Lead Free* installation requirements.
Features
• Female iron pipe thread to female iron pipe thread (black)
• Designed and manufactured to the highest quality standards
• Individually factory certified to withstand a minimum of 600 volts
on a dry line with no flashover
• Rated to 180°F (82°C) at 250psi (17.2 bar)
Specifications
A dielectric union shall be installed where indicated on the plans.
The union shall feature a female iron pipe thread to female iron
pipe thread (black). The union shall be a Watts Series LF3006.
Materials — Dimensions — Weights
B
A
Standards
Meets federal specifications for tensile strength and thread
end connections
Pressure — Temperature
Maximum Pressure: 250psi (17.2 bar)
Maximum Temperature: 180°F (82°C)
Options
GB Optional EPDM gasket
for use in steam or hot water
applications up to 300F.
SIZE MATERIALS DIMENSIONS WEIGHT
TAIL PIECE ADAPTER † NUT † INSULATOR GASKET ** A B
in. mm in. mm in. mm oz. gm
1
⁄2 15 Steel Steel Steel Polysulfone Buna-N 1
5
⁄8 41 2
1
⁄4 57 7.7 218
3
⁄4 20 Steel Steel Steel Polysulfone Buna-N 1
7
⁄8 48 2
1
⁄4 57 11 312
1 25 Steel Steel Steel Polysulfone Buna-N 2
1
⁄4 58 2
1
⁄2 64 11 312
1
1
⁄4 32 Steel Steel Steel Polysulfone Buna-N 2
3
⁄4 70 2
3
⁄4 70 23.4 663
1
1
⁄2 40 Malleable Iron Malleable Iron Malleable Iron Polysulfone Buna-N 3
1
⁄2 89 2
3
⁄4 70 43.4 1230
2 50 Malleable Iron Malleable Iron Malleable Iron Polysulfone Buna-N 4
1
⁄8 105 3
1
⁄8 79 43.4 1230
† Steel and malleable iron components are zinc plated
** Optional Gasket B (GB)- EPDM Gasket for use in steam or hot water applications up to 300 ° F (149 ° C) at 50 psi (3.4 bar)
For Residential and Commercial Applications
ES-LF3006
LEAD FREE
*
Job Name
–––––––––––––––––––––––––––––––––––––––––––
Contractor
––––––––––––––––––––––––––––––––––––––––––––
Job Location
–––––––––––––––––––––––––––––––––––––––––
Approval
–––––––––––––––––––––––––––––––––––––––––––––
Engineer
–––––––––––––––––––––––––––––––––––––––––––––
Contractor’s P.O. No.
––––––––––––––––––––––––––––––––––
Approval
–––––––––––––––––––––––––––––––––––––––––––––
Representative
––––––––––––––––––––––––––––––––––––––––
ES-LF3006 1325 © 2013 Watts
USA: T: [phone] • F: [phone] • Watts.com
Canada: T: [phone] • F: [phone] • Watts.ca
Latin America: T: (52) 81-1001-8600 • Watts.com
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts
reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications
on Watts products previously or subsequently sold.
*The wetted surface of this product contacted by consumable
water contains less than 0.25% of lead by weight.
NOTICE
Inquire with governing authorities for local installation requirements
The information contained herein is not intended to replace the full
product installation and safety information available or the experience
of a trained product installer. You are required to thoroughly read all
installation instructions and product safety information before begin-
ning the installation of this product.
NOTICE