Submittal Sheet

Series RA-1-SW
S
team Radiator Gate Valves
Sizes:
1
⁄2" – 1
1
⁄2"
Features
• Thread x male union
• Solid wedge
• Rising Stem
• Over-bonnet
• Teflon
®
stem packing
Pressure – Temperature
Working Pressure: Non-Shock
Saturated Steam: 15psi
Hot Water: 60psi
Dimensions – Weights
SIZE DIMENSIONS WEIGHT
A B
in. in. mm in. mm lbs kgs
1
/2 3
3
/8 85 3
5
/16 84 .5 .23
3
/4 3
9
/16 90 3
9
/16 91 .75 .34
1 3
15
/16 100 4
1
/8 104 1 .45
1
1
/4 4
7
/16 113 4
5
/8 118 1.25 .57
1
1
/2 4
7
/8 123 4
15
/16 126 1.5 .68
Teflon
®
is a registered trademark of the E.I. Dupont de Nemours & Company, Incorporated.
Materials
RA-1-SW
NO. PART MATERIAL
1 Body Bronze ASTM B584 C84400
2 Bonnet Bronze ASTM B584 C84400
3 Stem Brass ASTM B-16
4 Retainer Brass ASTM B-16
5 Disc Bronze ASTM B584 C84400
6 Disc Nut Brass ASTM B-16
7 Packing Nut Brass ASTM B-16
8 Packing Teflon
®
9 Handwheel Plastic
10 Screw Steel AISI 1020
11 Name Plate Aluminum ASTM 209-1100
12 Swivel Forged Brass ASTM B124 C37700
13 Nut Bronze ASTM B584 C84400
B
A
10-11
9
3
7
4
8
6
2
1
5
12
13
For Health Hazard Applications
ES-RA-1-SW
Job Name
–––––––––––––––––––––––––––––––––––––––––––
Contractor
––––––––––––––––––––––––––––––––––––––––––––
Job Location
–––––––––––––––––––––––––––––––––––––––––
Approval
–––––––––––––––––––––––––––––––––––––––––––––
Engineer
–––––––––––––––––––––––––––––––––––––––––––––
Contractor’s P.O. No.
––––––––––––––––––––––––––––––––––
Approval
–––––––––––––––––––––––––––––––––––––––––––––
Representative
––––––––––––––––––––––––––––––––––––––––
ES-RA-1-SW 1103 © 2011 Watts
USA: T: [phone] • F: [phone] • Watts.com
Canada: T: [phone] • F: [phone] • Watts.ca
Latin America: T: (52) 81-1001-8600 • Watts.com
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts
reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications
on Watts products previously or subsequently sold.
The information contained herein is not intended to replace the full
product installation and safety information available or the experience
of a trained product installer. You are required to thoroughly read all
installation instructions and product safety information before begin-
ning the installation of this product.
NOTICE