Install Instructions

5
Servicing First and Second Check Valves
2
1
⁄2" and 3" 007
1. Remove cover bolts and cover.
2. Remove the retainer from the body bore. The check valve
modules can now be removed from the valve by hand or with
a screwdriver.
3. The check seats are attached to the cage with a bayonet
type locking arrangement. Holding the cage in one hand,
push the seat inward and rotate counterclock-wise against
the cage. The seat, spring cage, spring and disc assembly
are now individual components.
4. The disc assembly may now be cleaned and reassemble or
depending on its condition, may be discarded and replaced
with a new assembly from the repair kit. O-rings should be
cleaned or replaced as necessary. For more information, refer
to repair parts price list PL-RP-BPD.
5. Reassemble the Check valve modules. Check modules are
installed in the valve body with the seats facing the valve
inlet. The modules must be securely in place before the
retainer can be replace.
NOTE: No special tools required to service Series 007.
Replacement Parts
2
1
⁄2" and 3" 007
When ordering, specify ordering code number, kit number
and valve size.
First Check Kit
ORDERING CODE KIT NO. SIZE
in. mm
0887285 RK 007 CK1 2
1
⁄2, 3 65, 80
Kit Includes: Seat, seat o-ring, disc assembly, spring, spring retainer,
check cage and cover o-ring.
Second Check Kit
0887286 RK 007 CK2 2
1
⁄2, 3 65, 80
Kit Includes: Seat, seat o-ring, disc assembly, spring, spring retainer,
check cage and cover o-ring.
First and Second Check Rubber Parts
0887287 RK 007 RT 2
1
⁄2, 3 65, 80
Kit Includes: Two seat discs, two seat o-rings, two cover o-rings.
Cover Kit
0887288 RK 007 C 2
1
⁄2, 3 65, 80
Kit includes: Cover and cover o-ring.
Seat Kit
0887289 RK 007 S 2
1
⁄2, 3 65, 80
Kit Includes: Seat and seat o-ring.
“Use only original equipment manufactured parts to protect the
validated warranty.”
Check Assemblies
Seat
Seat
O-ring
Disc
Assembly
Spring Retainer
Caps/
Seat
Cover
Cover O-ring
Retainer
Body
First Check
Second Check
RP-IS-007.indd 5 10/22/08 3:21:24 PM