Specification Sheet
Leak Sensor
Used in conjunction with the A2C-M1 or A2C-WB-M1, the leak
sensor provides the maximum level of protection. Should water be
detected at the leak sensor at any time, the water flow to the wash-
ing machine hoses will be cut off immediately. This protects against
catastrophic water damage regardless of the operating cycle of the
washing machine.
Optional Accessories
A2-IntelliTimer: A remote timer which allows the IntelliFlow
®
to
be used with 240 VAC powered appliances. Request literature
ES/IS-A2-IntelliTimer.
Construction
The Watts No. A2C-M1 is equipped with
1
⁄2" (13mm) sweat inlet
adapters for both hot water and cold water supply tubing. It is sup-
plied with two mounting tabs used to secure the valve to the wall for
surface mount applications. The valve is enclosed in an engineered
polymer enclosure.
Easy Installation
The Watts A2C-M1 IntelliFlow
®
comes equipped with
1
⁄2" (13mm)
sweat adapt ers to re ceive tubing. Ei ther con nec tion may be used for
the hot or cold wa ter sup ply be cause the A2C-M1 is equipped with
long wear ing Buna-N di a phragms for long life.
Water supply con nec tions are 2
3
⁄8" (60mm) on cen ters.
No electrical wiring is required. Sim ply plug the wash ing machine
pow er cord into the IntelliFlow
®
and plug it to the stan dard 15A,
GFI†, 120 volt outlet.
†Ground fault interrupter circuit
Dimensions — Weights
Model A2C-M1
For Surface Mounting or
Retrofit Installation
Model A2C-WB-M1
For Recessed Wall Mounting
Use of the Watts Automatic Washing Ma chine Valve outlet for
appliances other than a washing machine is not recommended
and voids the warranty.
NOTICE
This valve cannot be used for 240 VAC, 3 phase appliances. The
Intelliflow with the IntelliTimer accessory supports this application.
Leak Sensor
Typical Installations
The Watts IntelliFlow
®
can be installed in new construction or as an
upgrade to existing installations.
Drain
Model A2C-WB-M1
Model A2C-M1
C
D
B
E
A
D
B
E
A
MODEL SIZE (DN) DIMENSIONS WEIGHT
A B C D E
in. mm in. mm in. mm in. mm in. mm in. mm lbs. kg
A2C-M1
1
⁄2 15 6 152 2
1
⁄8 54 4
1
⁄4
108 3
1
⁄32 77 2
3
⁄8 60 2.0 .9
A2C-M1-WB
1
⁄2 15 8
1
⁄2 216 2
1
⁄8 54 4
1
⁄4
108 3
1
⁄32 77 2
3
⁄8 60 3.5 1.6
11
3
⁄4" (298mm)
7"
(178mm)
10
5
⁄32
"
(258mm)
8
9
⁄16" (217mm)
C
NOTICE
Inquire with governing authorities for local installation requirements
CAUTION
!
ES-A2C-M1 1423 © 2014 Watts
USA:Tel:(978)689-6066•Fax:(978)975-8350•Watts.com
Canada: Tel:(905)332-4090•Fax:(905)332-7068•Watts.ca
Latin America: Tel:(52)81-1001-8600•Fax:(52)81-8000-7091•Watts.com
A Watts Water Technologies Company