R-Flex Brochure

insulated piping systems
insulated piping systems
Insulated supply and return piping for:
t)ZESPOJDIFBUJOH
t)ZESPOJDTOPXNFMUJOH
t%JTUSJDUIFBUJOH
t$PNNFSDJBMBOEQSPDFTTQJQJOH
t(FPUIFSNBM
t"HSJDVMUVSBMQJQJOH
t#JPNBTTIFBUTPVSDFT
t8PPEGJSFECPJMFST
t4PMBS
t$PPMJOHUPXFSTDIJMMFEXBUFSTZTUFNT
4500 E. Progress Place
Springfield, MO 65803-8816
www.wattsradiant.com/rflex
800-276-2419 (toll-free USA/Canada)
417-864-6108 (phone)
417-864-8161 (Fax)
The art of simplicity.
Traditional carrier pipes, such as copper
or black iron, require installers to cut and
install transition ttings to work around an
obstacle. With R-ex, installers no longer
have to cut pipe and add connecting
points. R-ex bends around the obstacle.
Fewer connections translate into
reduced cost of parts and labor, less risk
of leakages, and shorter installation times.
Each buried transition, or connection, is
sealed in a durable casing, protecting the
connections from stress, water, and time.
Moreover, R-ex system accessories can
be installed without any special tools.
R-ex connections are an additional
time-saver. Each connection is made with
a standard torque wrench. No special
tools required.
R-ex in action.
If there is a need to transfer heated
water, or water/glycol, from one location
to another, then there is a need for R-ex.
Fittings, Components, Accessories
DUAL R-FLEX
1” Carrier Pipe with 125 mm jacket
32 mm Carrier Pipe with 125 mm or 160 mm jacket
40 mm Carrier Pipe with 160 mm jacket
50 mm Carrier Pipe with 160 mm or 200 mm jacket
63 mm Carrier Pipe with 200 mm jacket
SINGLE R-FLEX
40 mm Carrier Pipe with 160 mm jacket
50 mm Carrier Pipe with 160 mm jacket
63 mm Carrier Pipe with 160 mm jacket
75 mm Carrier Pipe with 200 mm jacket
90 mm Carrier Pipe with 200 mm jacket
110 mm Carrier Pipe with 200 mm jacket
CASINGS
Casings are designed to protect the R-flex connection when
buried and can be used with all R-flex, from 125 mm to 200 mm
jacket sizes.
Casings are available in Tee, Elbow, and Coupling configurations.
FITTINGS
Tees, elbows, and
couplings are available
in two configurations –
blank or assembled.
Elbows and couplings are
equal sizes only.
Tees are available in
equal or one-step
reducing. Bushings
are available if a 2-step
reduction is required.
ADAPTERS
All adapters are R-flex by
NPT and are designed for
use solely with the R-flex
product line.
R-ex coils ready to be shipped.
© 2012 Watts Radiant
F-WR-Rex-1207