Specifications

7
Visit our website at http://watt-age.globalhobby.com for information on other Wattage products
To convert inches into millimeters: Inches x 25.4 = mm
To convert millimeters into inches: Millimeters / 25.4 = in
1/64" = .4mm
1/32" = .8mm
1/16" = 1.6mm
3/32" = 2.4mm
1/8" = 3.2mm
5/32" = 4.0mm
3/16" = 4.8mm
1/4" = 6.4mm
3/8" = 9.5mm
1/2" = 12.7mm
5/8" = 15.9mm
3/4" = 19.0mm
1" = 25.4mm
2" = 50.8mm
3" = 76.2mm
6" = 152.4mm
12" = 304.8mm
18" = 457.2mm
21" = 533.4mm
24" = 609.6mm
30" = 762.0mm
36" = 914.4mm
SECTION 5: METRIC CONVERSION CHART
Wattage stocks a complete line of replacement parts for your Tangent EP. Listed below are the replacement parts that
are available along with their respective part numbers for easy ordering convenience. We suggest ordering directly
from your local dealer. If your dealer does not stock Wattage products, you can order directly from us at the address
shown below:
SECTION 4: REPLACEMENT PARTS
WARNING
The Tangent EP includes a foam wing, stabilizer and rudder. It is very important that you use no solvents, Cyanoacrylate (C/A)
glue, or paint that can damage foam. If any of these chemicals comes in contact with the foam parts, the parts will be
destroyed and will not be covered under warranty. Use only epoxy on the foam parts where glue is required. If you decide to
add painted details to the airplane, use acrylic-based paints and always test the paint on a scrap piece first.
We do not suggest storing your airplane in an extremely hot environment (like the back of your car in direct sunlight) for any
length of time. The extreme heat could cause the fiberglass to buckle, the foam to melt and possibly damage the fragile
components of the radio system, ESC or batteries.
Global Services
18480 Bandilier Circle
Fountain Valley CA 92708
Phone: [phone] Fax: [phone]
Wattage Tangent EP - Complete ----------------------------128417
Instruction Manual-----------------------------------------------145385
Wing Set -----------------------------------------------------------145387
Fuselage Set------------------------------------------------------145388
Belly Pan Only----------------------------------------------------145392
Stabilizer Set w/Carbon Rod ---------------------------------145390
Cowling -------------------------------------------------------------145389
Canopy Cover ----------------------------------------------------145391
Decal Set ----------------------------------------------------------145386
Main Landing Gear Set ----------------------------------------152280
Tail Wheel Assembly--------------------------------------------152100
Pushrod Wires (4) ------------------------------------------------ 152110
Clevis & Horn Set (2ea.) ---------------------------------------- 152112
Torque Rod Set ---------------------------------------------------- 152120
Nylon Hinges (6) -------------------------------------------------- 152130
370 Electric Motor Only ----------------------------------------- 131350
370 Motor Set w/Gear Box & Prop--------------------------- 145346
3.67:1 Gear Box Only-------------------------------------------- 131371
Gear Set for 3.67:1 Gear Box ---------------------------------131376
Spinner Assembly------------------------------------------------- 145310
Nylon Propeller ----------------------------------------------------131381
On the Web
http://globalservices.globalhobby.com