User's Manual
SAFETY INSTRUCTIONS
Make sure the battery is fully charged before use.
When not in use, remove the battery from its device. Some
electronic equipment will draw current even when the switch
is off.
Do not short-circuit the terminals. This battery is protected
with an internal self-resetting fuse, but short circuits may still
cause severe damage to the battery.
Do not attempt to open the battery case under any
circumstances.
Do not remove the battery from any equipment that is
powered on. Always power off your equipment before
removing the battery.
Use the battery only under proper environmental conditions:
14°F to 122°F (-10°C to 50°C), and with a relative humidity
(RH) less than 85%.
PRODUCT FEATURES
Check button activates LCD screen and shows
remaining battery capacity and output voltage.
USB Standard-A, Type-C, and Micro-B ports to power
USB devices like laptop computers, smartphones,
tablets, and other portable devices.
D-tap output for powering cameras and accessories.
Built-in intelligent control circuit for protection
against damage caused by current, voltage,
temperature, or short-circuiting.
The battery should be charged up to 50% for long-term
storage. After 4 months of storage, the battery will require a
recharge up to 50%.






