User Manual

5
6
OVERVIEW
1. Battery-level check button
1. Battery-level LED meter
Shows remaining capacity of
the battery. When capacity
reaches less than 9%, the
bottom LED will flash.
1. Slide lock
1. D-tap output
12 V, 10 A max
1. USB output
Press the battery-level check
button to start charging or to
power your USB device.
1. Mounting interface: 3-stud
or V-mount
1
2
3
4
5
6
4
2
3
1
IMPORTANT
 You must connect both halves
of the buddy system battery in
order for it to be operational.
 You can only connect the
halves of buddy system
batteries with matching
serial numbers.
 After assembling the two
halves, the 100% battery
level LED will light up for
three seconds. Then, the
battery level will display the
current charge amount.