TM AM-192-B VM-192-B Buddy System Li-ion Battery with LED and 3-Stud or V-Mount Thank you for choosing Watson Pro Please read this user manual carefully, and keep it for reference before using the battery.
SAFETY INSTRUCTIONS Make sure the battery is fully charged before use. When not in use, remove the battery from its device. Some electronic equipment will draw current even when the switch is off. Do not short-circuit the terminals. This battery is protected with an internal self-resetting fuse, but short circuits may still cause severe damage to the battery. Do not attempt to open the battery case under any circumstances. Do not remove the battery from any equipment that is powered on.
OVERVIEW 1 Battery-level check button 1. 2 Battery-level LED meter 1. Shows remaining capacity of the battery. When capacity reaches less than 9%, the bottom LED will flash. 3 Slide lock 1. 4 D-tap output 1. 12 V, 10 A max 5 USB output 1. Press the battery-level check button to start charging or to power your USB device. IMPORTANT You must connect both halves of the buddy system battery in order for it to be operational.
SPECIFICATIONS Mount type AM-192-B: 3-Stud VM-192-B: V-Mount Capacity (�2) 6.5 Ah, 96 Wh Voltage 14.8 V Max output power 150 W Max output current 12 A Average run-time 115 min. @ 100 W Weight 2.9 lb. (1.3 kg) AM-192-B: 6.7 � 3.9 � 2.5 in. (17 � 10 � 6.3 cm) VM-192-B: 6.7 � 3.9 � 2.2 in. (17 � 10 � 5.7 cm) Dimensions (H � W � D) CHARGING TIME Battery Single channel AM-192-B VM-192-B 580 min. Dual channel Four channel 230 min. 460 min.
