User's Manual

Use a Phillips screwdriver to remove the four

mounting screws.

Reverse the cage plate’s orientation, and

replace the screws until tight.

Reversing the V-Mount Plate Orientation

Depending on how the plate attaches to your camera cage or

cheese plate, you may need to reverse the V-mount plate so

the V-mount will be in the upright position.

To reverse the V-mount plate, follow these steps:

Caution:

Avoid mounting the V-mount battery upside down. It can slip

out of the V-mount.

The V-mount plate can attach to the cage plate only along its

length, as pictured. Do not attempt to attach the V-mount plate

across the width of the cage plate.

Loosen only the mounting screws. Do not loosen any of the

other screws on the V-mount plate.

1 2

PAGE 1
Reversing the V-Mount Plate Orientation Depending on how the plate attaches to your camera cage or cheese plate, you may need to reverse the V-mount plate so the V-mount will be in the upright position. To reverse the V-mount plate, follow these steps: 1 Use a Phillips screwdriver to remove the four mounting screws. 2 Reverse the cage plate’s orientation, and replace the screws until tight. 1 2 Caution: Avoid mounting the V-mount battery upside down. It can slip out of the V-mount.
PAGE 2
One-Year Limited Warranty This Watson Pro product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.