TM TM C-AM-4E C-VM-4E Quad Position Li-ion Battery Charger Thank you for choosing Watson Pro Please read this user manual carefully and keep it for reference before using the charger.
SAFETY INSTRUCTIONS Do not store, place, or use the charger where it may come into contact with excess heat, water or moisture. High-voltage internal components present the risk of electrical shock. Make sure the XLR cable is securely locked into the port before use. You should hear an audible click. Charge only on a vibration-free, dry surface at room temperature.
1 CH1 CH3 CH2 CH4 1 1 1 DC Out 2 3 4 3 5 4 6 4 4 7 OVERVIEW 1. 1 Charging status indicator 1. 5 Charge / DC out switch 2 1. DC output indicator 6 1. DC output 3 1. Battery release latch 7 1. AC input 4 1. Charging plates Included: • AC power cable • 4-pin XLR cable LED STATUS Green • Charger is turned on without any batteries connected. • Battery is fully charged. • Battery connected with low or no power. Red • Battery is charging.
Battery Type (Ah) Approx. charging time (hr.) 4.4 2.7 6.6 4.0 8.8 5.3 11.0 6.6 13.2 7.9 DC OUTPUT The charger can supply DC output power at 15 V and 4.0 A. Make sure to select DC out on the Charger / DC out switch and that the charger is plugged in to an AC outlet. SPECIFICATIONS AC input 100–240 V, 50–60 Hz, 3.8 A Output charging power 16.8 V, 2.5 A (per charging plate) DC output power (4-pin XLR) 15 V, 4.
