User Manual

Charger Operation | 5
CHARGING OPERATION
1
Insert the AC or DC adapter into the back of
the charger.
2
Place one or two CR123A or CR2 batteries
into the charging slots as indicated by the
polarity symbols (+and-) marked inside each
chamber.
3
Plug the adapter cord into an AC outlet or the
DC charging socket of your automobile.
4
Use the table on page 6 to determine the
approximate time necessary to recharge the
batteries.
5
When the red LED status light turns blue,
the batteries are fully charged. See the LED
Status table on page 6 for more information.
6
The batteries may be left in the battery
charger in order for them to remain fully
charged. The charger will keep the batteries
fully charged by means of trickle charge.
7
When charging is completed, unplug the
charger from the outlet and then remove the
batteries from the charger.