Rapid Charger for CR123A and CR2 3 Volt Lithium Batteries Owner's Manual Please read before using this equipment.
Thank you for purchasing the Watson Rapid Charger for CR123A / CR2 3 Volt batteries. Browse through this manual for information and useful tips on how to use your new equipment.
The Watson Rapid Charger will provide your batteries with outstanding power and performance for your electronic devices. The batteries can be charged up to 1,000 times and provide high performance for high-drain devices. The charger can be used to simultaneously recharge two CR123A 3 Volt batteries, two CR2 3 Volt batteries, or one of each. The universal 100-240V AC power is perfect for traveling, and the DC adapter allows you to charge from a vehicle. THE WATSON RAPID CHARGER'S FEATURES INCLUDE: 1.
CHARGING OPERATION 1 Insert the AC or DC adapter into the back of the charger. 2 Place one or two CR123A or CR2 batteries into the charging slots as indicated by the polarity symbols (+and-) marked inside each chamber. 3 Plug the adapter cord into an AC outlet or the DC charging socket of your automobile. 4 Use the table on page 6 to determine the approximate time necessary to recharge the batteries. 5 When the red LED status light turns blue, the batteries are fully charged.
LED STATUS: Color Status Red Charging Flashing blue Charge is 80%–90% complete Blue Charge is 90%–100% complete Flashing red and blue Battery error If the LED lights do not turn on, make sure that you have inserted the correct type of batteries, and that they are facing the proper direction. CHARGING TIME*: (AC or DC adapter) Battery Number Approx. Charging Time* CR123A 1 or 2 2.4 hours CR2 1 or 2 1.
LED Status Lights Battery connectors AC Adapter DC Adapter LED Status / Charging Time | 7
IMPORTANT SAFETY INSTRUCTIONS: PLEASE READ THESE OPERATING INSTRUCTIONS BEFORE USING YOUR CHARGER. Only charge rechargeable CR123A or CR2 3 Volt Lithium-ion batteries. Do not charge Alkaline, Ni-MH, Ni-Cd, Carbon Zinc, or any other voltage, type, or size battery. Charging the wrong type of batteries may cause an explosion, rupture, or leakage, resulting in personal injury and property damage. Unplug the charger from the outlet before cleaning. Do not use a liquid cleaner to clean the device.
WARNING: CAUTION! TO REDUCE THE RISK OF DAMAGE: Do not expose the batteries to water or liquids. Do not heat or dispose the batteries or charger in fire. Do not tear off the label or disassemble. The battery charger is for indoor use only. Do not expose to moisture. Insert batteries correctly, making certain to align the "+" and "-" terminals.
SPECIFICATIONS: Input Voltage 100~240V AC, 50/60 Hz 12V DC Output 3.7V DC, 300 mA per channel Operating Temp. 32-113°F (0-45°C) Dimensions 2.125 x 3.375 x 0.875 54 x 86 x 22 mm Specifications are typical; individual units may vary. Specifications are subject to change and improvement without notice. The actual product may vary from the product pictured in this document.
ONE-YEAR LIMITED WARRANTY This Watson product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.
www.poweredbywatson.
