User Manual

6 | Charger Operation
CHARGING OPERATION:
1
Insert one to four 9V NiMH batteries into
the battery slots, oriented according
to the polarity symbols (+ or -) that are
marked on the battery.
2
Connect the supplied AC adapter's barrel
plug into the charger's rear power input
jack.
3
Plug the AC adapter into a standard AC
outlet.
4
The charger will perform a self test when
the power is first connected. The LED
will come on shortly and then go off to
indicate ready status.
5
Battery charging is initiated automatically
when batteries are inserted. A normal
battery is indicated by a solid red light.
The charger will begin charging if normal
batteries are detected.