4-Bay 4-Hour Rapid Charger 9V Charger for 9V AA/AAA & Ni-Cd for NiMH NiMH Rechargeable Rechargeable Batteries Batteries Owner's Manual Please read before using this equipment.
Thank you for purchasing the Watson 4-Bay 9V Battery Charger. Browse through this manual for information and useful tips on how to use your new equipment.
THE WATSON 4-BAY 9V BATTERY CHARGER'S FEATURES INCLUDE: Powered by an internal AC adapter with compact fold-in outlet prongs for indoor use. Multiple charging circuits allow you to charge one or four 9V size nickelmetal hydride batteries. 7 A special circuit senses when the battery is fully charged and automatically stops charging.
A safety timer shutoff turns off the charger to prevent overcharging batteries. Short-circuiting protection protects the charger and batteries from short circuits. . Overcurrent protection protects the charger from defective or shorted batteries.
CHARGING OPERATION: 1 Insert one to four 9V NiMH batteries into the battery slots, oriented according to the polarity symbols (+ or -) that are marked on the battery. 2 Connect the supplied AC adapter's barrel plug into the charger's rear power input jack. 3 Plug the AC adapter into a standard AC outlet. 4 The charger will perform a self test when the power is first connected. The LED will come on shortly and then go off to indicate ready status.
6 There are four independent charging channels and respective LED indicators. When charging is complete, the LED indicator will turn green. The batteries with green LED indicators are ready for use. 7 When charging is completed, unplug the charger from the outlet and then remove the batteries from the charger. DANGER: To reduce the risk of fire or an electric shock, carefully follow these instructions. This manual contains important safety and operating instructions for your charger.
CHARGING TIMES*: (approximate) NiMH 9V Capacity Charging Time 160 mAh 100 min. 200 mAh 140 min. 250 mAh 170 min. * Actual charging time may vary depending on the cell's discharge level, capacity, and condition. Longer charging time may occur when the charger is used in temperatures above 95°F (35°C).
Charging Time | 9
SPECIFICATIONS: Power Adapter: Input 100~240 V AC, 50/60 Hz; 3.8 W (max) Charging Current: 100 mA ± 20 mA Safety Guard Timer: 6 hrs. Automatic Shutoff: Negative Delta V and Zero Slope Detection Operating Temp: 32-113°F (0-45°C) Output: 9 V DC / 100 mA Dimensions: 3.4 � .3 � 0.9 in. (84 � 86 � 23 mm) Weight: 2.4 oz. (70 g) Approvals: CE, RoHS Specifications are typical; individual units may vary. Specifications are subject to change and improvement without notice.
GENERAL CHARGING HINTS: It is normal for the batteries to become warm while charging. Charge batteries in temperatures between 32°F and 104°F (0°C and 40°C). Cold batteries cannot charge fully. If they are too warm, the batteries can lose their capacity to recharge. Do not charge batteries other than those listed in this manual, and do not use procedures other than those described in this manual.
IMPORTANT SAFETY INSTRUCTIONS: WARNING! TO REDUCE THE RISK OF INJURY: Charge only NiMH batteries with this charger. Other types of batteries can burst, causing personal injury and damage. Unplug the charger from the AC outlet before attempting maintenance or cleaning. Do not disassemble the charger. Take it to a qualified service technician when service or repair is required. Improper assembly may result in the risk of electric shock or fire.
CAUTION! TO REDUCE THE RISK OF DAMAGE: Do not use an extension cord. Its use could result in fire or electric shock. Do not operate the charger if it has received a sharp blow or has been dropped or damaged in any way. Take it to a qualified service technician for repair. Do not expose the charger to rain or excessive moisture. Never use the charger as a DC power source for any electrical equipment.
WARNING: To reduce the risk of fire or shock hazard, do not expose this product to rain or moisture. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN DO NOT REMOVE COVER OR BACK. NO USERSERVICEABLE PARTS INSIDE. HAVE PRODUCT SERVICED BY QUALIFIED PERSONNEL ONLY TO REDUCE THE RISK OF ELECTRIC SHOCK. This symbol is intended to alert you to the presence of uninsulated and dangerous voltage inside the product housing which could be of sufficient power to deliver an electric shock. Do not open the product housing.
ONE-YEAR LIMITED WARRANTY This Watson product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.
