Instruction Manual

Watlow Series PD ■ 94 ■ Chapter 9 Device Config Table
Parameter Name
and Description
Web Page Your
Settings
Range Default Modbus*
(Read/write and
scaling)
Output 2 - Output Source Alarm 4Set to enable Alarm 4 source.,Configuration Output 2,,No (0)Yes (1),No (0),443 (R/W)
Output 2 - Output Source Alarm 5Set to enable Alarm 5 source.,Configuration Output 2,,No (0)Yes (1),No (0),444 (R/W)
Output 2 - Output Source Alarm 6Set to enable Alarm 6 source.,Configuration Output 2,,No (0)Yes (1),No (0),445 (R/W)
Output 2 - Output Source Alarm 7Set to enable Alarm 7 source.,Configuration Output 2,,No (0)Yes (1),No (0),446 (R/W)
Output 2 - Output Source Alarm 8Set to enable Alarm 8 source.,Configuration Output 2,,No (0)Yes (1),No (0),447 (R/W)
Output 2 - Output Source Digital 3Set to enable Digital Input 3 source.,Configuration Output 2,,No (0)Yes (1),No (0),453 (R/W)
Output 2 - Output Source Digital 4Set to enable Digital Input 4 source.,Configuration Output 2,,No (0)Yes (1),No (0),454 (R/W)
Output 2 - Output LogicSelect output state in an alarm true condition.,Configuration Output 2,,Energized (0)De-energized (1),Energized
(0),448 (R/W)
Output 2 - Output Source
Alarm 4
Set to enable Alarm 4 source.
Configuration Output 2 No (0)
Yes (1)
No (0) 443 (R/W)
Output 2 - Output Source
Alarm 5
Set to enable Alarm 5 source.
Configuration Output 2 No (0)
Yes (1)
No (0) 444 (R/W)
Output 2 - Output Source
Alarm 6
Set to enable Alarm 6 source.
Configuration Output 2 No (0)
Yes (1)
No (0) 445 (R/W)
Output 2 - Output Source
Alarm 7
Set to enable Alarm 7 source.
Configuration Output 2 No (0)
Yes (1)
No (0) 446 (R/W)
Output 2 - Output Source
Alarm 8
Set to enable Alarm 8 source.
Configuration Output 2 No (0)
Yes (1)
No (0) 447 (R/W)
Output 2 -Output Source Digi-
tal 3
Set to enable Digital Input 3
source.
Configuration Output 2 No (0)
Yes (1)
No (0) 453 (R/W)
Output 2 -Output Source Digi-
tal 4
Set to enable Digital Input 4
source.
Configuration Output 2 No (0)
Yes (1)
No (0) 454 (R/W)
Output 2 - Output Logic
Select output state in an
alarm true condition.
Configuration Output 2 Energized (0)
De-energized (1)
Energized (0) 448 (R/W)
Output 2 - State
Display state of output.
Monitor Device Inactive (0)
Active (1)
Inactive (0) 437 (R)