Instruction Manual

Watlow Series PD ■ 91 ■ Chapter 9 Device Config Table
Parameter Name
and Description
Web Page Your
Settings
Range Default Modbus*
(Read/write and
scaling)
Output 1 - Output Source Alarm 1Set to enable Alarm 1 source.,Configuration Output 1,,No (0)Yes (1),No (0),400 (R/W)
Output 1 - Output Source Alarm 2Set to enable Alarm 2 source..,Configuration Output 1,,No (0)Yes (1),No (0),401 (R/W)
Output 1 - Output Source Alarm 3Set to enable Alarm 3 source.,Configuration Output 1,,No (0)Yes (1),No (0),402 (R/W)
Output 1 - Output Source Alarm 4Set to enable Alarm 4 source.,Configuration Output 1,,No (0)Yes (1),No (0),403 (R/W)
Output 1 - Output Source Alarm 5Set to enable Alarm 5 source.,Configuration Output 1,,No (0)Yes (1),No (0),404 (R/W)
Output 1 - Output Source Alarm 6Set to enable Alarm 6 source.,Configuration Output 1,,No (0)Yes (1),No (0),405 (R/W)
Output 1 - Output Source Alarm 7Set to enable Alarm 7 source.,Configuration Output 1,,No (0)Yes (1),No (0),406 (R/W)
Output 1 - Output Source Alarm 8Set to enable Alarm 8 source.,Configuration Output 1,,No (0)Yes (1),No (0),407 (R/W)
Output 1 - Output Source Digital 3Set to enable Digital Input 3 source.,Configuration Output 1,,No (0)Yes (1),No (0),429 (R/W)
Output 1 - Output Source Digital 4Set to enable Digital Input 4 source.,Configuration Output 1,,No (0)Yes (1),No (0),430 (R/W)
Output 1 - Output Source
Alarm 1
Set to enable Alarm 1 source.
Configuration Output 1 No (0)
Yes (1)
No (0) 400 (R/W)
Output 1 - Output Source
Alarm 2
Set to enable Alarm 2 source.
Configuration Output 1 No (0)
Yes (1)
No (0) 401 (R/W)
Output 1 - Output Source
Alarm 3
Set to enable Alarm 3 source.
Configuration Output 1 No (0)
Yes (1)
No (0) 402 (R/W)
Output 1 - Output Source
Alarm 4
Set to enable Alarm 4 source.
Configuration Output 1 No (0)
Yes (1)
No (0) 403 (R/W)
Output 1 - Output Source
Alarm 5
Set to enable Alarm 5 source.
Configuration Output 1 No (0)
Yes (1)
No (0) 404 (R/W)
Output 1 - Output Source
Alarm 6
Set to enable Alarm 6 source.
Configuration Output 1 No (0)
Yes (1)
No (0) 405 (R/W)
Output 1 - Output Source
Alarm 7
Set to enable Alarm 7 source.
Configuration Output 1 No (0)
Yes (1)
No (0) 406 (R/W)
Output 1 - Output Source
Alarm 8
Set to enable Alarm 8 source.
Configuration Output 1 No (0)
Yes (1)
No (0) 407 (R/W)
Output 1 - Output Source Digi-
tal 3
Set to enable Digital Input 3
source.
Configuration Output 1 No (0)
Yes (1)
No (0) 429 (R/W)
Output 1 - Output Source Digi-
tal 4
Set to enable Digital Input 4
source.
Configuration Output 1 No (0)
Yes (1)
No (0) 430 (R/W)
Output 1 - Output Logic
Select output state in an
alarm true condition.
Configuration Output 1 Energized (0)
De-energized (1)
Energized (0) 408 (R/W)