Instruction Manual

Watlow Series PD ■ 75 ■ Chapter 9 Device Config Table
Parameter Name
and Description
Web Page Your
Settings
Range Default Modbus*
(Read/write and
scaling)
Digital Input Switch To Digital 1 Set Point Status,Monitor Device,,Inactive (0)Active (1),Inactive (0),64 (R)
Digital Input Switch To Digital 1 Set Point Status,Monitor Device,,Inactive (0)Active (1),Inactive (0),71 (R)
Digital Input Switch To Digital 2 Set Point Status,Monitor Device,,Inactive (0)Active (1),Inactive (0),65 (R)
Digital Input Switch To Digital 2 Set Point Status,Monitor Device,,Inactive (0)Active (1),Inactive (0),72 (R)
Digital Input Set Point Loop 1,Monitor Device,,Loop 1 (0)Loop 2 (1),Loop 1 (0),365 (R/W)
Digital Input Set Point Loop 2,Monitor Device,,Loop 1 (0)Loop 2 (1),Loop 1 (0),385 (R/W)
Control Loop 1 Switch To
Digital Input 3 Set Point Status
Indicates that Digital Input 3
is forcing Control Loop 1 to
use the Digital Set Point.
Monitor Device Inactive (0)
Active (1)
Inactive (0) 64 (R)
Control Loop 2 Switch To
Digital Input 3 Set Point Status
Indicates that Digital Input 3
is forcing Control Loop 2 to
use the Digital Set Point.
Monitor Device Inactive (0)
Active (1)
Inactive (0) 71 (R)
Control Loop 1 Switch To
Digital Input 4 Set Point Status
Indicates that Digital Input 4
is forcing Control Loop 1 to
use the Digital Set Point.
Monitor Device Inactive (0)
Active (1)
Inactive (0) 65 (R)
Control Loop 2 Switch To Digi-
tal Input 4 Set Point Status
Indicates that Digital Input 4
is forcing Control Loop 2 to
use the Digital Set Point.
Monitor Device Inactive (0)
Active (1)
Inactive (0) 72 (R)
Digital Input 3 Set Point
Control Loop
Select the control loop affected
by the Digital Set Point for
Digital Input 3
Monitor Device Loop 1 (0)
Loop 2 (1)
Loop 1 (0) 365 (R/W)
Digital Input 4 Set Point
Control Loop
Select the control loop affected
by the Digital Set Point for
Digital Input 4
Monitor Device Loop 1 (0)
Loop 2 (1)
Loop 1 (0) 385 (R/W)