Instruction Manual

tag_EIP_T2O_DYNAMIC_ASSEMBLY_POINT
Numeric 109 1 1 STRUCT OF 8-BIT CIA
tag_EIP_T2O_DYNAMIC_ASSEMBLY_POINT Numeric 109 2 1 STRUCT OF 8-BIT CIA
tag_EIP_T2O_DYNAMIC_ASSEMBLY_POINT Numeric 109 3 1 STRUCT OF 8-BIT CIA
tag_EIP_T2O_DYNAMIC_ASSEMBLY_POINT Numeric 109 4 1 STRUCT OF 8-BIT CIA
tag_EIP_T2O_DYNAMIC_ASSEMBLY_POINT Numeric 109 5 1 STRUCT OF 8-BIT CIA
tag_EIP_T2O_DYNAMIC_ASSEMBLY_POINT Numeric 109 6 1 STRUCT OF 8-BIT CIA
tag_EIP_T2O_DYNAMIC_ASSEMBLY_POINT Numeric 109 7 1 STRUCT OF 8-BIT CIA
tag_EIP_T2O_DYNAMIC_ASSEMBLY_POINT Numeric 109 8 1 STRUCT OF 8-BIT CIA
tag_EIP_T2O_DYNAMIC_ASSEMBLY_POINT Numeric 109 9 1 STRUCT OF 8-BIT CIA
tag_EIP_T2O_DYNAMIC_ASSEMBLY_POINT Numeric 109 10 1 STRUCT OF 8-BIT CIA
When using the T Æ O Dynamic Assembly (Input) the size would be determined by
the tag name being retrieved. As an example, because the Loop 1 Alarm Setpoint
(formatted as a DINT) is not read in the Static Assembly it may be desired to read
this tag via the Dynamic Assembly. The input assembly size would change
accordingly for the given formats:
- DINT = 12
- INT = 24
2.2.3 O Æ T Static Assembly
If using the O Æ T Static Assembly (Output) the following sizes should be defined in
RSLogix5000 for the following Comm Formats:
- DINT = 5
- INT = 10
2.2.4 O Æ T Dynamic Assembly
Data Store Tag Instance
Param
Type
EIP
Class
EIP
Instance
EIP
Attribute
EIP Data
Type
tag_CLC_SETPOINT 1 Numeric 113 1 32
DINT
tag_CLC_SETPOINT 2 Numeric 113 1 40
DINT
tag_OLC_SETPOINT 1 Numeric 113 1 31
INT
tag_OLC_SETPOINT 2 Numeric 113 1 39
INT
tag_CL_METHOD 1 Enumerated 113 1 34
UINT
Data Store Tag Instance
Param
Type
EIP
Class
EIP
Instance
EIP
Attribute
EIP
Data
Type
tag_CLC_SETPOINT 1 Numeric 112 1 32 DINT
tag_CLC_SETPOINT 2 Numeric 112 1 40 DINT
tag_OLC_SETPOINT 1 Numeric 112 1 31 INT
tag_OLC_SETPOINT 2 Numeric 112 1 39 INT
tag_CL_METHOD 1 Enumerated 112 1 34 UINT
tag_CL_METHOD 2 Enumerated 112 1 42 UINT
tag_EIP_AI_ERROR_ACK 1 Numeric 112 1 99 WORD
tag_EIP_ALARM_ACTIONS 1 Numeric 112 1 100 WORD
156
*See Class, Instance, and Attribute Descriptions beginning on page 169 for enumerated values.