Instruction Manual

Watlow Series PD ■ 126 ■ Chapter 9 Device Config Table
Parameter Name
and Description
Web Page Your
Settings
Range Default Modbus*
(Read/write and
scaling)
Hardware - Device NameIdentifies the controllers’ name. The controller can be browsed using this name via NetBIOS.,Configuration Net-
work,,,0, (R/W)
Hardware - Device Watlow NameIdentifies the controllers’ Watlow name. The controller can be browsed using this name.,Device Informa-
tion,,,0, (R)
Hardware - Device NameIdentifies the controllers’ name. The controller can be browsed using this name via NetBIOS.,Configuration Net-
work,,,0, (R/W)
Hardware - Device Always NameIdentifies the name that controller can always be accessed via NetBIOS.,Device Information,,,0, (R)
Hardware - Net IP ResolutionIdentifies the order of obtaining the controllers’ IP address.,Configuration Network,,Try DHCP server, then
use Auto IP, then use fixed IP address (0)Try DHCP server, then use fixed IP address (1)Try Auto IP, then use fixed IP address (2)Use
Fixed IP address (3),Try DHCP server, then use Auto IP, then use fixed IP address (0), (R/W)
Hardware - Device Name
Identifies the controllers’ name.
The controller can be browsed
using this name via NetBIOS.
Configuration Network 0 (R/W)
Hardware - Device Watlow
Name
Identifies the controllers’
Watlow name. The controller
can be browsed using this
name.
Device Information 0 (R)
Hardware - Device Name
Identifies the controllers’
name. The controller can be
browsed using this name via
NetBIOS.
Configuration Network 0 (R/W)
Hardware - Device Always
Name
Identifies the name that con-
troller can always be accessed
via NetBIOS.
Device Information 0 (R)
Hardware - Net IP Resolution
Identifies the order of obtain-
ing the controllers’ IP address.
Configuration Network Try DHCP server, then use
Auto IP, then use fixed IP
address (0)
Try DHCP server, then use
fixed IP address (1)
Try Auto IP, then use fixed
IP address (2)
Use Fixed IP address (3)
Try DHCP
server then
use fixed IP
address (0)
(R/W)