User Manual

6.6 WATLOW Series 998 User’s Manual
Factory Menus, Chapter 6
Factory-Panel Lockout
Communications Menu Lockout
Select the lockout level for the Communications Menu. Set the lock-
out to no lockout [none], read only [read] or full lockout [FULL].
[COM] This prompt appears only if the controller is equipped with com-
munications hardware (99__- ____- _R__ or 99__- ____- _S__).
Default
↓
[none] [read] [FULL]
[COM] [COM] [COM]
Diagnostics Menu Lockout
Select the lockout level for the Diagnostics Menu. Set the lockout to no
lockout [none], read only [read] or full lockout [FULL].
[diAg] This prompt always appears.
Default
↓
[none] [read] [FULL]
[diAg] [diAg] [diAg]
Calibration Menu
Select the lockout level for the Calibration Menu. Set the lockout to no
lockout [none], read only [read] or full lockout [FULL].
[`CAL] This prompt always appears.
Default
↓
[none] [read] [FULL]
[`CAL] [`CAL] [`CAL]
[COM]
[diAg]
[`CAL]