User Manual

5.10 WATLOW Series 998 User’s Manual
Operation Menus, Chapter 5
Operation-PID A
Reset, Output 1A or 2A
Adjust the control action to eliminate the offset or droop between the
set point and the actual process temperature for PID channel A out-
puts. When set to [```0] reset is disabled.
[rE1A] This prompt appears only if [`dFL] (Calibration Menu) is set to
[``US] and [Pb1A] is not set to [```0].
Default
↓
[`)00] … [9(99]
repeats/min.
[rE1a] [rE1a]
Integral, Output 1A or 2A
Adjust the control action to eliminate the offset or droop between the
set point and the actual process temperature for PID channel A out-
puts. When set to [```0] integral is disabled.
[It1A] This prompt appears only if [`dFL] (Calibration Menu) is set to
[``S1] and [Pb1A] is not set to [```0].
Default
↓
[`)00] … [9(99]
min./repeat
[It1A] [It1A]
[rE1A]
[rE2A]
[It1A]
[1T2A]