User Manual

WATLOW Series 998 User’s Manual 4.27
Setup Menus, Chapter 4
Setup-Output
Output 4
Set the alarm type for output 4.
• [`AL4] de-energizes output 4 in an alarm condition.
• [AL4n] energizes output 4 in an alarm condition.
[`Ot4] This prompt appears only on controllers equipped with output 4
hardware for a relay (99__-____-_B__, or 99__-____-_D__, or 99__-____-_E__
or 99__-____-__K__) or switched dc (99__-____-_C__).
Default
↓
[`AL4] [AL4n] [``no]
[`Ot4] [`Ot4] [`Ot4]
Alarm 4
Select the alarm channel and type for alarm 4.
[`AL4] This prompt appears only on controllers equipped with output 4
hardware for a relay (99__-____-_B__, or 99__-____-_D__, or 99__-____-_E__
or 99__-____-_K__) or switched dc (99__-____-_C__), and with [`Ot4] set to
[`AL4] or [AL4n].
Default
↓
[`PrA] [`deA] [`Prb] [`deb]
[`AL4] [`AL4] [`AL4] [`AL4]
[`Ot4]
[`AL4]