User Manual

WATLOW Series 998 User’s Manual 4.23
Setup Menus, Chapter 4
Setup-Output
Process B
Select the process range for output B.
[Prcb] This prompt appears only on controllers equipped with output B
process hardware (99__-___F-____).
Default
↓
4-20mA 0-20mA 0-5VÎ 1-5VÎ 0-10VÎ (dc)
[4-20] [0-20] [`0-5] [`1-5] [0-10]
[Prcb] [Prcb] [Prcb] [Prcb] [Prcb]
Output 3
Set the alarm type for output 3.
• [`AL3] to de-energize output during alarm condition.
• [AL3n] to energize output during alarm condition.
[`Ot3] This prompt appears only on controllers equipped with output 3
hardware for a relay (99__-____-B___, or 99__-____-J___ or 99__-____-K___)
or switched dc (99__-____-C___).
Default
↓
[`AL3] [AL3n] [``no]
[`Ot3] [`Ot3] [`Ot3]
[Prcb]
[`Ot3]
NOTE:
See Chapter 7 for
more information on
alarms.