User Manual

DIP Switches
WATLOW Series 998 User’s Manual 1.3
Hardware Setup, Chapter 1
Control Chassis
Top View (996 & 998)
Left-side View (997 & 999)
Lockout
DIP
ON
OFF
ONOFF
ONOFF
Output 4
Option Board and Dip
Output 3
Option Board and Dip
Figure 1.3 -
External signal con-
ditioner power sup-
ply DIPs.
Output 3 Output 4
(99
__-____-T___) (99__-____-_T__)
20V ± 5% @ 30mA
12V ± 5% @ 30mA
5V ± 5% @ 30mA
O
N
↑
12
O
N
↑
12
O
N
↑
12
O
N
↑
12
O
N
↑
12
O
N
↑
12
2 - Set DIP switches for
outputs equipped with
an external signal
conditioner power
supply. Only controllers
with model number
99__-____-T___ or
99__-____-_T__ have an
external signal condi-
tioner power supply.
NOTE:
For other voltages
or current settings
contact the factory.
3 - When the DIP switches are set, gently insert the controller chassis into
the case and push it firmly into place until all four tabs snap into place.
NOTE:
Only controllers
with the indicated
model numbers
have these DIP
switches.