User guide

Chapter Five
Features
Limit . . . . . . . . . . . . . . . . . . . . . . . . . . . .5.2
Input
Calibration Offset . . . . . . . . . . . . . . . .5.3
Filter Time Constant . . . . . . . . . . . . .5.4
Sensor Selection . . . . . . . . . . . . . . . .5.5
Range Low and Range High . . . . . . .5.5
Event Input . . . . . . . . . . . . . . . . . . . .5.6
Retransmitting the process value . . . .5.7
Alarms
Alarm Set Points . . . . . . . . . . . . . . . .5.8
Alarm Hysteresis . . . . . . . . . . . . . . . .5.8
Process or Deviation Alarms . . . . . . .5.9
Alarm Latching . . . . . . . . . . . . . . . . .5.9
Alarm Silencing . . . . . . . . . . . . . . . . .5.10
Communications
Overview . . . . . . . . . . . . . . . . . . . . . .5.11
Watlow Series 97 Features ■ 5.1
5