Manual

NOTE: For more information about how parameter settings affect the controller’s operation, see Chapter Five, Features.
NOTE: Complete calibration menus and parameters are explained at Watlow’s web site,
http://www.watlow.com/literature/prodtechinfo. Search on 96 calibration manual.
Active if Calibration Lock (Lock-
out Menu) is not set to [hide].
1602 w
[``no] (0)
[``no] no (0)
[`yes] yes (800)
[dflt] Default Settings
Restore default set-
tings.
Active if Calibration Lock (Lock-
out Menu) is not set to [hide].
1601 w
[``no] (0)[``no] no (0)
[`yes] yes (1)
[`rSt] Restore Factory
Calibration
Restore factory cali-
bration. Does not af-
fect operations and
setup parameters.
[cin1] Calibration 1 Menu Enter [dIag] mode (1789) 1512 w
[Fcty] Factory Page Enter
[cin1] mode (1415) 1600 w
Active: Always
(Model 96A - available only with
ac input.)
1515 rnone
[line] Line Frequency
Displays the AC line
frequency in Hz.
Proportional term 205
Integral term 206
Derivative term 207
[`Pid][``no]
[`Pid] enables PID
terms in custom
menu
[Com] sends modbus
packet every 1 sec-
ond
[TShT] Troubleshooting
Helps solve prob-
lems with the con-
troller.
Active: Always1505 rnone
[cnt2] Channel 2 A-D
Counts
Displays the raw
channel 2 A-D
counts.
Active: Always1504 rnone
[cnt1] Channel 1 A-D
Counts
Displays the raw
channel 1 A-D
counts.
Active: Always1501 rnone
[Acnt] Ambient A-D
Counts
Displays the raw
ambient channel A-
D counts.
Active: Always1500 rnone
[amb] Ambient
Temperature
Read the ambient
temperature in 0.1
degrees Fahrenheit.
6.22 ■ Parameters Watlow Series 96
Factory Page / Calibration 1 Menu
Display Parameter Range Default Modbus Conditions for
(Modbus Value) Register Parameters to Appear
read/write