Manual

****Output 4 parameters cannot be changed with the Modbus interface.
Active if Output 4 (Output Menu
4) is set to [``AL] (Alarm),
Alarm Sides 4 (Output Menu 4)
is not set to [``Lo], output 4 is
a relay (96 _ _-_ _ _ D-_ _ _ _)
and Operations Page Lock
(Lockout Menu) is not set to
[hide].
none****
Process: high
limit of se-
lected sen-
sor range
Deviation:
999
Process: Alarm 4
Low+1 to high limit
of selected sensor
range
Deviation: 0 to 9999
[A4hi] Alarm 4 High
Set the high alarm
set point for output
4.
Active if Output 4 (Output Menu
4) is set to [``AL] (Alarm),
Alarm Sides 4 (Output Menu 4)
is not [``hi], output 4 is a
relay (96 _ _-_ _ _ D-_ _ _ _)
and Operations Page Lock
(Lockout Menu) is not set to
[hide].
none****
Process: low
limit of se-
lected sen-
sor range
Deviation:
-999
Process: low limit of se-
lected sensor range
to Alarm 4 High-1
Deviation: -1999 to 0
[A4Lo] Alarm 4 Low
Set the low alarm
set point for output
4.
Active if Output 3 (Output 3
Menu) is set to [``AL] (Alarm),
Alarm Sides 3 (Output 3 Menu)
is set to [``lo], output 3 is
present (96 _ _-_ _ D _-_ _ _ _)
and Operations Page Lock
(Lockout Menu) is not set to
[hide].
341 r/wProcess: high
limit of se-
lected sen-
sor range
Deviation:
999
Process: Alarm 3
Low+1 to high limit
of selected sensor
range
Deviation: 0 to 9999
[A3hi] Alarm 3 High
Set the high alarm
set point for output
3.
Watlow Series 96 Parameters ■ 6.7
Operations Page / Alarm Menu
Display Parameter Range Default Modbus Conditions for
(Modbus Value) Register Parameters to Appear
read/write
NOTE: For more information about how parameter settings affect the controller’s operation, see Chapter Five, Features.