User guide

Parameters, Chapter 6 Watlow Power Series ■ 6.17
NOTE: For more information about how parameter settings affect the controller’s operation, see Chapter Five, Control
Methods and Features.
Active: Always.51 rn/a
[```0] to [`680]
(0 to 680)
[ratU] Unit Voltage Rating
(Volts)
Reads load voltage of
the unit.
Active: Always.30 r n/a
[``)0] to [(999]
(0 to 9999)
[Sbld] Software Build
Number
Reads software build
level of the unit.
Active: Always.4 r n/a
[``)0] to [(999]
(0 to 9999)
[SUEr] Software Version
Reads software ver-
sion of the unit.
Active: Always.7 r n/a
[``)0] to [(999]
(0 to 9999)
[HUer] Hardware Version
Reads hardware ver-
sion of the unit.
Active: Always.5 r n/a
[``00] to [``99] year
(00 to 99)
[``00] to [``99]
month (00 to 52)
[date] Manufactured
Date (yymm)
Reads month and
year of manufacture.
Active: Always.2 r n/a
[```0] to [9999]
(0 to 9999)
[`Sn_] Unit Serial Num-
ber Low Digits
Reads the low digits
of the serial number
of the unit.
Active: Always.1 r n/a
[```0] to [9999]
(0 to 9999)
[`Sn–] Unit Serial Num-
ber High Digits
Reads the high digits
of the serial number
of the unit.
[InFo] Unit Information Menu
[Fcty] Factory Page
This menu is used to read unit information that is stored during manufacture.
Active if [glOC] is set to [`Unl].
1359 r/w
[`Unl] (0)[`Unl] Unlocked (0)
[`LOC] Locked (1)
[diAg] Diagnostics Facto-
ry Menu Lockout
Sets lock on diagnos-
tics menu.
Active if [glOC] is set to [`Unl].
1358 r/w
[`Unl] (0)[`Unl] Unlocked (0)
[`LOC] Locked (1)
[dAtA] System Data
Factory Menu
Lockout
Sets lock on system
data menu.
Display Parameter Range Default Modbus Conditions for
(Modbus Value) Address Parameters to Appear
read/write