User guide

6 ■ Watlow MINICHEF 2000 Application 27
Step 8 Operate the Controller
Summary of Key Functions in Operation Mode
Key Function
A Temp
B Time
C Jog & Increment
D Menu Select
E Start/Stop
F Probe & Decrement
Startup
Apply power to the oven.
[`idle] will appear on the display.
If the Real-time Clock option is installed and [setUp] / [time] is programmed, the
time of day will appear on the display.
At this time you can either select a pre-programmed menu or set a manual menu.
ç
WARNING: Starting or initiating a menu can cause or initiate machine motion. Appropriate reasonable care should be
taken to prevent personal injury or machine damage as a result of operator initiated or unexpected machine motion.
Select a Pre-Programmed Menu
1. Press the Menu Select key.
The controller will display the currently selected menu. If no menus have been pro-
grammed the word [`nonE] will appear on the display.
2. Press the Up-arrow or Down-arrow key until the menu you want appears on the dis-
play.
Note: The controller will not respond if you select an invalid menu (one for which the total of Time 1 and Time 2 for
the menu is set to greater than 0).
DE
C
F
MINICHEF 2000
[````1]
Edit Accept
Back-UpExit
DE
C
F
MINICHEF 2000
[````9]
Edit Accept
Back-UpExit
AB
GH
AB
GH
DE
C
F
MINICHEF 2000
[`idle]
Edit Accept
Back-UpExit
AB
GH