Manual

LogicPro User’s Guide Chapter 9: Function Block Diagrams
Doc.# 28002-00 Rev 3.00 Watlow Anafaze 111
For more information on creating new Variables, refer to
“Adding a Project Variable” on page 52, or “Adding a
Resource/Program Variable” on page 56
Assigning Names and Execution Orders to Function Blocks
Each function block in an FBD program must be assigned a
unique name and execution order. To assign a name to a
function block:
1. Select the [Selector] tool.
2. Double-click on the function block you wish to name.
This causes the Assign Name to Func. Block dialog
box to appear as shown in Figure 9.4
3. Enter a unique name for the function block into the
Name field. You can click [List] to view all the function
block names already assigned in the program.
Figure 9.4 Assign Name to Function Block
Dialog Box
NOTE! If you do not assign a name to a function block,
LogicPro will assign a unique name to the new
function block for you.
NOTE! The maximum length of a function block name is
ten (10) alphanumeric characters.