Manual

LogicPro User’s Guide Chapter 8: Ladder Diagrams
Doc.# 28002-00 Rev 3.00 Watlow Anafaze 99
4. Click [Cut] on the Standard toolbar.
– or –
Select Edit, then Cut
– or –
Press <Ctrl> + <X>.
The Selected Rung(s) disappear(s) from the screen. See
“Pasting Rungs” below for directions on pasting the elements
elsewhere.
Copying Rungs
To copy a rung:
1. Select the [Selector] tool.
2. Position the pointer to the left of the Left Power Rail
(each Rung has its own unique number).
3. Click on the number of the Rung number that you want
to Copy. You may select multiple Rungs by holding
down the left mouse button and dragging the “dotted
box” around adjacent Rungs numbers.
4. Select [Copy] on the Standard toolbar.
– or –
Select Edit, then Copy
– or –
Press <Ctrl> + <C>.
The Selected Rung(s) are copied and available for pasting, see
“Pasting Rungs” for directions on pasting the elements
elsewhere.
Pasting Rungs
To paste a rung:
1. Click [Paste] on the Standard toolbar.
– or –
Select Edit, then Paste
– or –
Press <Ctrl> + <P>.
2. The Selector pointer changes to indicate the next click
will paste a rung.
3. Position the pointer where you want to Paste the Rung.
4. Click. LogicPro inserts the Rung(s) at this point. You can
continue to Paste the same Rung(s) until you overwrite
this data with another Cut or Copy instruction.