User guide

Watlow EZ-ZONE
®
RMH Module • 90 • Chapter 4 Setup Page
RM High Density Module • Setup Page
Display
Parameter Name
Description
Range Default
Modbus
Relative
Address
CIP
Class
Instance
Attribute
hex (dec)
Probus
Index
Parameter
ID
Data
Type
&
Read/
Write
[SFn;D]
[SFn.d]
Math (1 to 24)
Source Function D
Set the type of function
that will be used for this
source.
[nonE] None (61)
[``Ai] Analog Input (142)
[CUrr] Current (22)
[`C;Pr] Cool Power, Control
Loop (161)
[`h;Pr] Heat Power, Control
Loop (160)
[PWr] Power, Control Loop
(73)
[`Lnr] Linearization (238)
[MAt] Math (240)
[``Pu] Process Value (241)
[`SP;C] Set Point Closed,
Control Loop (242)
[`SP;o] Set Point Open, Con-
trol Loop (243)
[`uAr] Variable (245)
None 6546
[offset 70]
0x7D
(125)
1 to 24
4
- - - - 25004 uint
RWES
[`si;d]
[ Si.d]
Math (1 to 24)
Source Instance D
Set the instance of the
function selected above.
1 to 250 1 6556
[offset 70]
0x7D
(125)
1 to 24
9
- - - - 25009 uint
RWES
[`S2;D]
[ SZ.d]
Math (1 to 24)
Source Zone D
Set the zone of the function
selected above.
0 to 16 0 6566
[offset 70]
0x7D
(125)
1 to 24
0xE (14)
- - - - 25014 uint
RWES
[SFn;E]
[SFn.E]
Math (1 to 24)
Source Function E
Set the type of function
that will be used for this
source.
[nonE] None (61)
[ALM] Alarm (6)
[`CPE] Compare (230)
[`Ctr] Counter (231)
[`dio] Digital I/O (1142)
[Ent;A] Profile Event Out A
(233)
[Ent;b] Profile Event Out B
(234)
[Ent;C] Profile Event Out C
(235)
[Ent;d] Profile Event Out D
(236)
[Ent;E] Profile Event Out E
(247)
[Ent;F] Profile Event Out F
(248)
[Ent;g] Profile Event Out G
(249)
[Ent;h] Profile Event Out H
(250)
[`FUn] Function Key (1001)
[`lgC] Logic (239)
[tMr] Timer (244)
[`uAr] Variable (245)
None 6548
[offset 70]
0x7D
(125)
1 to24
5
- - - - 25005 uint
RWES
Note:
Some values will be rounded off to fit in the four-character display.
Full values can be read with other interfaces.
Note:
If there is only one instance of a menu, no submenus will appear.
** These parameters/prompts are available in these menus with firmware revisions 6.0 and
above.
R: Read
W: Write
E: EEPROM
S: User
Set