User guide

Watlow EZ-ZONE
®
RMH Module • 57 • Chapter 4 Setup Page
RM High Density Module • Setup Page
Display
Parameter Name
Description
Range Default
Modbus
Relative
Address
CIP
Class
Instance
Attribute
hex (dec)
Probus
Index
Parameter
ID
Data
Type
&
Read/
Write
[``Fn]
[ Fn]
Digital Output (1 to 12)
Function
Select what function will
drive this output.
[`oFF] Off (62)
[``ai] Analog Input
[ALM] Alarm (6)
[`C;pr] Cool Power ()
[`h;pr] Heat Power ()
[`CPE] Compare (230)
[`Ctr] Counter (231)
[`dio] Digital I/O (1142)
[Ent;A] Profile Event Out A
(233)
[Ent;b] Profile Event Out B
(234)
[Ent;C] Profile Event Out C
(235)
[Ent;d] Profile Event Out D
(236)
[Ent;E] Profile Event Out E
(247)
[Ent;F] Profile Event Out F
(248)
[Ent;g] Profile Event Out G
(249)
[Ent;h] Profile Event Out H
(250)
[`FUn] Function Key (1001)
[`lnr] Linearization (238)
[`lgC] Logic (239)
[mat] Math (240)
[``Pu] Process Value (241)
[SoF;1] Special Function Out-
put 1 (1532)
[SoF;2] Special Function Out-
put 2 (1533)
[SoF;3] Special Function Out-
put 3 (1534)
[SoF;4] Special Function Out-
put 4 (1535)
[tMr] Timer (244)
[`uAr] Variable (245)
1828
[offset 30]
0x 6A
(106)
1 to 12
5
73 6005 uint
RWES
[``Fi]
[ Fi]
Digital Output (1 to 12)
Function Instance
Set the instance of the
function selected above.
1 to 24 1 1830
[offset 30]
0x6A
(106)
1 to 12
6
74 6006 uint
RWES
[``S2]
[ SZ]
Digital Output (1 to 12)
Source Zone
Set the zone of the function
selected above.
0 to 16 0 1842
[offset 30]
0x6A
(106)
1 to 12
0xC (12)
- - - - 6012 uint
RWES
Note:
Some values will be rounded off to fit in the four-character display.
Full values can be read with other interfaces.
Note:
If there is only one instance of a menu, no submenus will appear.
** These parameters/prompts are available in these menus with firmware revisions 6.0 and
above.
R: Read
W: Write
E: EEPROM
S: User
Set